For full functionality of this site it is necessary to enable JavaScript.
EMIN.COM.LA
0

What to note before safe lathe machining

18/08/y 16:13:24

Discover the important notes in the following article to ensure safety when machining lathes. Starting from how to set up the machine, working posture to protecting yourself, the article helps you grasp the essential skills to avoid accidents and increase machining efficiency.

Prepare machinery and ensure equipment safety before machining

Before putting the lathe into operation, the worker needs to check the overall equipment. Place the machine on a flat, stable surface to avoid vibration, which directly affects the accuracy of the machining.

Next, check the clamping parts such as the chuck, driveplate or faceplate. These parts need to be properly tightened to keep the workpiece stable, if loose, it can easily cause slipping, broken knives or dangerous accidents.

An important note that is often overlooked: never leave the chuck key on the machine after clamping the workpiece. When the machine rotates, the key can fly out and cause unwanted injuries.

In addition, make sure the electrical system and emergency stop button are working properly. The operator should be fully equipped with labor protection: glasses, gloves, safety shoes,...

Personal safety and proper work habits

When standing in front of a lathe, the first thing to remember is that personal protective equipment is never redundant. A pair of safety glasses, suitable gloves and safety shoes will help you avoid unnecessary accidents. On the contrary, seemingly harmless things such as loose clothes, rings or necklaces can become deadly dangers, and a little carelessness can get you caught in a part rotating at high speed. 

A small but extremely important habit is to clean the surface of the part and the cutting tool before installation. Do not ignore a few dust particles or remaining metal chips, they can cause the workpiece to not be clamped tightly, shake, affecting the accuracy and safety of the machining process.

Operation and monitoring during turning

When starting to operate the lathe, do not rush to turn it on immediately. You need to make sure that the cooling system is ready, the spindle speed and feed are adjusted correctly according to the material and the part being processed. For example, turning hard steel requires a slow speed and a reasonable feed rate, while aluminum or copper can run faster. If the cutting is too deep or the wrong mode is selected, the tool will wear out quickly and easily damage the part.

During the turning process, observe the cutting line, listen to the machine sound, any strange noise or unusual vibration is a sign that you must stop and check immediately. Do not try to "run it right away" because just a small mistake can cause the tool to break or the workpiece to fly out, which is extremely dangerous.

An immutable principle: only adjust and measure when the machine has stopped completely. Many new workers often rush, which is dangerous for themselves and can damage the knife and machine.

Read more:

Some advantages that can be found on CNC machines

Working on a pipe threading machine in just a few simple steps

What role does a pipe threading machine play? Why should you use it?

ຂ່າວທີ່ກ່ຽວຂ້ອງ

Storing insulin at the wrong temperature: the medication becomes ineffective, yet it’s impossible to tell by looking at it
19/11/y 10:00:13

When insulin and other biological products are stored outside the recommended temperature range (2°C to 8°C for unopened products), their protein structures become denatured, leading to a reduction or complete loss of therapeutic activity. In many cases, the medication may be compromised without showing any visible signs, posing a risk of difficult-to-control hyperglycemia and constituting a violation of pharmaceutical storage standards

How to Choose the Right Welding Machine Power Capacity
18/11/y 11:06:42

Welding machine power describes the electrical input required to create and sustain an arc. Choose it by checking the available supply, welding process, duty cycle, material thickness, and expected operating time.

What Is a Three-Phase Welding Machine and How to Choose One?
18/11/y 11:01:18

A three-phase welding machine typically uses 380V industrial power and suits workshops that need stable operation for heavier or recurring welding work. Choose the process, capacity, input supply, and working intensity together.

Purchase genuine Associated Research (ARI) equipment at EMIN, with a 5-year warranty
18/11/y 09:19:46

Since September 2021, EMIN has served as the official distributor in Vietnam for brands under the Ikonix umbrella, including Associated Research. You now have a local point of contact for expert product selection advice, price quotations, and after-sales support eliminating the need to navigate the complexities of sourcing equipment independently. All genuine products come with a manufacturer’s warranty of up to 5 years, subject to the manufacturer’s terms and conditions

ຕິດຕາມຂ່າວສານ ແລະ ຂໍ້ສະເໜີ

ຮັບສ່ວນຫຼຸດພິເສດຕາມປະລິມານ, ອັບເດດລາຄາຂາຍສົ່ງ ແລະ ການແຈ້ງເຕືອນສິນຄ້າໃໝ່ສົ່ງກົງເຖິງອິນບັອກຂອງທ່ານ.

ໂດຍການສະໝັກສະມາຊິກ, ທ່ານຍອມຮັບ ເງື່ອນໄຂການໃຫ້ບໍລິການ ແລະ ນະໂຍບາຍຄວາມເປັນສ່ວນຕົວ ຂອງພວກເຮົາ.

ການຊ່ວຍເຫຼືໍາດ່ວນ

ເຂົ້າເຖິງຜູ້ຊ່ຽວຊານທີ່ໄດ້ຮັບການຢັ້ງຢືນຂອງພວກເຮົາໂດຍກົງ