Wondery WDL-RCUQ-1000 Gas Fired Tilting Crucible Metal Melting Furnaces for Copper Scraps (500Kg/Hr; 45-50m3/tons)

Furnace type: Copper industrial metal melting furnace

Crucible capacity: 1000KG

Melting rate: about 500Kg/Hr (at Continuous working status)

Fuel: Natural Gas

Raw Material: Copper Scraps

Max temperature: 1400 Degree Celcius (atmosphere)

Fuel: natural gas 8400Kcal/M3

Rated working temperature: 1250℃ (atmosphere)

Temperature uniformity: ±15℃

Gas consumption: about 45-50m3/ton copper for gas

Loss rate: about 1%

Gas burner brand: Riello, Italy

Tilting mechanism: Hydraulic type

Supply scope:

Crucible industrial metal melting furnace body, 1 set;

Control box, 1 set;

Gas burner, 1 set;

Thermal coupling, 2 pieces (1 piece for standby);

Graphite crucible, 1 piece for melting copper;

Hydraulic system, 1 set;

Heat preservation material bundle, 1 set;

1.melting furnace introduction

The gas fired industrial metal melting furnace is used to melt copper with a max temperature of

1400 degree celcius (atmosphere temperature) with natural gas as fuel. In comparison with the

normal induction melting furnace, the gas fired industrial copper metal melting furnace with graphite

crucible is more easy in operation, and more cost saving. The copper melting furnace doesn’t require

cooling system, and is very easy in installation and operation.

Features

4.1 The crucible copper industrial metal melting furnace shell is fabricated from steel plates and

sectional steel.

4.2 The refractory lining of the industrial metal melting furnace is made of once-forming castable.

The castable material is high temperature type supplied by Allied Mineral Products (Tianjin) Co., Ltd.

The heat preservation layer is comprised of porcelain fiber board, and light mullite heat preservation bricks.

Advantages of lining: good heat preservation purpose, low energy consumption, and long service life.