Wondery RJ-5 Pit Well Type Spheroidizing Bright Annealing ເຕົາອົບການປິ່ນປົວຄວາມຮ້ອນ (580KW; 30000kg/h)
ຜູ້ຜະລິດWondery(ເບິ່ງສິນຄ້າອື່ນໆຂອງຍີ່ຫໍ້ນີ້)
ModelRJ-5
ຕິດຕໍ່
ການຊຳລະເງິນທີ່ປອດໄພ
ການຮັບປະກັນຄຸນນະພາບ
ປ່ຽນ ແລະ ສົ່ງຄືນງ່າຍ
ມີບໍລິການຈັດສົ່ງ
Application of Heat Treatment Furnace
The heat treatment furnace is used for spheroidizing treatment of wires, aluminum alloy wires, copper wires or other nodule wires.
Rated power (kw): 580
Capacity: 30000kg/h
Furnace type: Pit Or Well Type
Type: Electric Resistance
Application: Spheroidizing Bright Annealing
Customized service: Yes
Rated temperature: 800 Degree Celcius
Voltage: 580 3 Phase 50HZ
Effective size (mm): 3500*3200
2. Purpose of Annealing
The purpose of annealing is to heat the steel whose structure deviates from the equilibrium
state to an appropriate temperature, hold it for a certain time, and then cool it slowly
(cooling with the furnace) to obtain a heat treatment process close to the equilibrium structure.
There are many kinds of annealing processes for steel, which can be divided into two categories
according to the heating temperature: one is annealing above the critical temperature (AC1 or AC3),
also known as phase transformation recrystallization annealing, including complete annealing,
incomplete annealing, spheroidizing annealing and diffusion annealing (homogenization annealing).
The other is annealing below the critical temperature, including recrystallization annealing and stress
relief annealing. According to the cooling method, annealing can be divided into isothermal annealing
and continuous cooling annealing.
ຕິດຕາມຂ່າວສານ ແລະ ຂໍ້ສະເໜີ
ຮັບສ່ວນຫຼຸດພິເສດຕາມປະລິມານ, ອັບເດດລາຄາຂາຍສົ່ງ ແລະ ການແຈ້ງເຕືອນສິນຄ້າໃໝ່ສົ່ງກົງເຖິງອິນບັອກຂອງທ່ານ.
ໂດຍການສະໝັກສະມາຊິກ, ທ່ານຍອມຮັບ ເງື່ອນໄຂການໃຫ້ບໍລິການ ແລະ ນະໂຍບາຍຄວາມເປັນສ່ວນຕົວ ຂອງພວກເຮົາ.
ການຊ່ວຍເຫຼືໍາດ່ວນ
ເຂົ້າເຖິງຜູ້ຊ່ຽວຊານທີ່ໄດ້ຮັບການຢັ້ງຢືນຂອງພວກເຮົາໂດຍກົງ