Dwyer MTL5541 Galvanic Barrier, DIN Rail Mount, Plug-In, for Dwyer® Hazardous Areas (mA)
Weight: 5.3 oz
Accuracy: ± 15 µA
Mounting: T-section 35 mm DIN rail to EN 50022
Isolation: 250 V RMS, tested at 1500 V RMS minimum, between safe-area and hazardous-area terminals; 50 V between safe-area circuits and power supply
Compliance: FM, UL
Input Type: mA
Output Detail: Signal range: 4-20 mA; Under/over-range: 0-24 mA
Output Signal: Current
Response Time: 50 µs
LED Indicators: Green: Power indication
Supply Voltage: 20 to 35 Vdc
Terminal block: up to 2.5 mm²
Load Resistance: 0 to 360Ω @ 24 mA / 0 to 450Ω @ 20 mA
Current Sink, Max: 600 Ω max
Electrical Safety: Vo= 28 V Io= 93 mA Po= 651mW Um= 253 RMS or DC. Weight: 5.3 oz (150 g)
Output Resistance: >1 MΩ
Power Consumption: 1 W
Relative Humidity: 5 to 95% RH
Supply Power Type: DC
Temperature Drift: < 0.8µA/°C
Response Time Note: Settles to within 10% of final value within 50 µs
Input Control Signal: 16.2 Vdc
Storage Temperature, Max: 176 °F
Storage Temperature, Min: -40 °F
Operating Temperature, Max: 140 °F
Operating Temperature, Min: -6 °F
ຮັບສ່ວນຫຼຸດພິເສດຕາມປະລິມານ, ອັບເດດລາຄາຂາຍສົ່ງ ແລະ ການແຈ້ງເຕືອນສິນຄ້າໃໝ່ສົ່ງກົງເຖິງອິນບັອກຂອງທ່ານ.
ໂດຍການສະໝັກສະມາຊິກ, ທ່ານຍອມຮັບ ເງື່ອນໄຂການໃຫ້ບໍລິການ ແລະ ນະໂຍບາຍຄວາມເປັນສ່ວນຕົວ ຂອງພວກເຮົາ.
ເຂົ້າເຖິງຜູ້ຊ່ຽວຊານທີ່ໄດ້ຮັບການຢັ້ງຢືນຂອງພວກເຮົາໂດຍກົງ