Yokogawa 96062 Clamp-on probe (100A)
Measurable conductor size:Max. φ24 mm
Measuring range:AC 0 to 100 Arms (141 A peak)
Output voltage:AC 0 to 500 mVrms (5 mV/A)
Accuracy (sine wave input):+ Band width:±0.5%rdg±0.1 mV( 50/60 Hz), ±1.0%rdg±0.2 mV (40 Hz to 1 kHz)
+ Phase:Within ±2.0 deg (at 1 A to 100 A, 45 Hz to 65 Hz)
Temperature & humidity range (guaranteed accuracy):23 ±5°C, 85%RH or less(no ondensation)
Rated voltage between circuit and ground:AC 300 Vrms Max.
Operating temperature & humidity range:0 to 50°C, 85%RH or less (no condensation)
Storage temperature & humidity range:-20 to 60°C, 90%RH or less (no condensation)
Temperature coefficient:In the range of 0 to 50°C and the amount of change from 23°C is ±0.5% rdg ± 0.1 mV or less
Maximum allowable input:AC 100 Arms continuous (50/60Hz)
Influence of the conductor location:Within ±0.5% rdg
Influence of the external magnetic field: 0.2 A equivalence or less (400 A/m, 50/60Hz)
Output impedance:Approx. 11 Ω
Withstand voltage:AC 3.51 kVrms / 5 s Between jaw and case, case and output terminal, output terminal and jaw.
Environmental condition:Altitude up to 2000 m, in-door use
Recommended calibration period:1 year
Dimension:60(W)×100(H)×26(D) mm (excluding projections)
Cable length:Approx.3m
Output terminal:MINI DIN 6PIN
Weight:Approx.160g
Accessory:Instruction manual, cable marker
ຮັບສ່ວນຫຼຸດພິເສດຕາມປະລິມານ, ອັບເດດລາຄາຂາຍສົ່ງ ແລະ ການແຈ້ງເຕືອນສິນຄ້າໃໝ່ສົ່ງກົງເຖິງອິນບັອກຂອງທ່ານ.
ໂດຍການສະໝັກສະມາຊິກ, ທ່ານຍອມຮັບ ເງື່ອນໄຂການໃຫ້ບໍລິການ ແລະ ນະໂຍບາຍຄວາມເປັນສ່ວນຕົວ ຂອງພວກເຮົາ.
ເຂົ້າເຖິງຜູ້ຊ່ຽວຊານທີ່ໄດ້ຮັບການຢັ້ງຢືນຂອງພວກເຮົາໂດຍກົງ