WELLER WR3M Soldering Rework Station
Dimensions L x W x H: 280.0 x 240.0 x 103.0mm
Automatic Tool Identification: Yes
Capacity (l/min): 18 l/min
Desoldering: Yes
Equipotential Bonding: Yes
Equipotential Bonding Socket: Via 3.5mm Pawl Socket on Back of Device (HardGrounded)
ESD Safe: Yes
Hot Air (picto): Yes
Interface: USB
IPC Compliant: (Tip to Ground) Corresponds to IPC-J-001
Maximum Hot Air Flow Rate l/min (Depends on
Tool): 15 l/min
Noise level (distance 1 m) dB(A): 0.7 bar
Number of Channels: 3
Overcurrent Release: 2.0 A
Power: 360 W (400 W)
Temperature Accuracy °C: ± 9 °C
Temperature Accuracy °F: ±17 °F
Temperature Range (Depends on Tool): 199 - 849°F
Temperature Range °C: 93 - 454 °C
Temperature Range °F: 200 - 850 °F
Temperature Stability °C: ±2 °C
Temperature Stability °F: ±4 °F
Tip Type: WT
Vacuum: 0.7 bar (79 kPA) (8 psi)
Voltage: 120 V
ຮັບສ່ວນຫຼຸດພິເສດຕາມປະລິມານ, ອັບເດດລາຄາຂາຍສົ່ງ ແລະ ການແຈ້ງເຕືອນສິນຄ້າໃໝ່ສົ່ງກົງເຖິງອິນບັອກຂອງທ່ານ.
ໂດຍການສະໝັກສະມາຊິກ, ທ່ານຍອມຮັບ ເງື່ອນໄຂການໃຫ້ບໍລິການ ແລະ ນະໂຍບາຍຄວາມເປັນສ່ວນຕົວ ຂອງພວກເຮົາ.
ເຂົ້າເຖິງຜູ້ຊ່ຽວຊານທີ່ໄດ້ຮັບການຢັ້ງຢືນຂອງພວກເຮົາໂດຍກົງ