Tormach 8L LATHE ເຄື່ອງກຶງ CNC
Spindle
Spindle Power: 1.5 hp (1.11 kW)
Spindle Speed: 180 to 5,000 RPM
Through Spindle Bore: 1 in. (26 mm)
Spindle Nose: 5C
Control
Standard Feature: Rigid Tapping
Standard Feature: Single Point Threading
Tail Stock
Taper: MT2
Diameter: 0.9 in. (22 mm)
Travel: 2.2 in. (55 mm)
Travels
X-Axis: 4.5 in. (114 mm)
Z-Axis: 10 in. (254 mm) with tailstock
Motion
X- and Z-Axis Maximum Feed Rate: 150 IPM (3.8 m/min)
Axis Drivers (X, Z): High-Performance, Polyphase Stepper Motors with Leadshine® Microstepping Drivers
Power
Power Requirements: Single-Phase 115 VAC, 50/60 Hz, 15A Breaker
Supplied Plug: NEMA 5-15P plug; requires NEMA 5-15R receptacle
Machine Specifications
Table Length × Width: 7.5 in. × 4 in. (191 mm × 102 mm)
Machine Footprint: 50 in. × 26 in. (1.2 m × 0.7 m)
Typical System Weight: 838 lb. (380 kg)
Maximum Swing Over Bed: 8 in. (200 mm)
Maximum Swing Over Carriage: 4 in. (100 mm)
Overall System Height: 52 in. (1.3 m)
Accessories
Quick Change Tool Post: Standard
Full Enclosure: Standard
Automatic Collet Closer: Optional
Machine Stand: Optional
Coolant: Optional
PATHPILOT® Controller
Features: User-friendly design
Axis Support: Support for up to four axis continuous machining
Programming: Intuitive conversational programming
Usable G-Code Memory: PathPilot Controller: 80 GB; PathPilot Operator Console: 40 GB
Software Updates: Free PathPilot® updates for life
ຮັບສ່ວນຫຼຸດພິເສດຕາມປະລິມານ, ອັບເດດລາຄາຂາຍສົ່ງ ແລະ ການແຈ້ງເຕືອນສິນຄ້າໃໝ່ສົ່ງກົງເຖິງອິນບັອກຂອງທ່ານ.
ໂດຍການສະໝັກສະມາຊິກ, ທ່ານຍອມຮັບ ເງື່ອນໄຂການໃຫ້ບໍລິການ ແລະ ນະໂຍບາຍຄວາມເປັນສ່ວນຕົວ ຂອງພວກເຮົາ.
ເຂົ້າເຖິງຜູ້ຊ່ຽວຊານທີ່ໄດ້ຮັບການຢັ້ງຢືນຂອງພວກເຮົາໂດຍກົງ