For full functionality of this site it is necessary to enable JavaScript.
EMIN.COM.LA
0
Product image

TOA DKK WM-32EP ການນໍາໄຟຟ້າແບບມືຖື/ເຄື່ອງວັດແທກ pH (0~14pH; 0~±2000mV; 0-100.0℃)

ModelWM-32EP
ຕົ້ນກຳເນີດJapan
ການຮັບປະກັນ12 ເດືອນ
ຕິດຕໍ່
ການຊຳລະເງິນທີ່ປອດໄພ
ການຮັບປະກັນຄຸນນະພາບ
ປ່ຽນ ແລະ ສົ່ງຄືນງ່າຍ
ມີບໍລິການຈັດສົ່ງ

-Measuring Method:

+pH: Glass electrode method;

+Electrical conductivity: AC two-electrode method

-Display: Custom LCD (simultaneous display of dual channel measured data)

-Sensor connection:

+CH1: Electrical Conductivity

+CH2: pH、ORP

-Meas. Range:

pH: 0.00-14.00

ORP : 0-±2000mV

Temperature: 0-100.0℃

[If standard cell is used]

Electrical conductivity: 0.1mS/m-10 S/m

Electrical resistivity: 0.1Ω・m-10kΩ・m

Salinity (NaCl equivalent obtained by electrical conductivity): 0-4.00%

Temperature: 0-80.0℃

*If the cell for tabletop use is used, the measuring range differs according to the cell that is used.

-Display Range:

+pH: -2.00-16.00

+ORP: 0-±2200mV

+Electrical conductivity:

0-200.0μS/m

0-2.000mS/m

0-20.00mS/m

0-200.0mS/m

0-2.000S/m

0-20.00S/m

0-200.0S/m

+Electrical resistivity: 0.005-2.000Ω・m

0-20.00Ω・m

0-200.0Ω・m

0-2.000kΩ・m

0-20.00kΩ・m

0-200.0kΩ・m

0-2.000MΩ・m

+Salinity (NaCl): 0-4.04%

+Temperature: -5-110.0℃

* In regards to the range, the electrical conductivity/resistivity differs according to the cell that is used

-Electrical Conductivity/Resistivity Range Switching: Auto/manual

-Electrical Conductivity/ Resistivity Unit Switching: Can switch between SI Units (S/m, Ω ・ m) and the previous units (S/cm, Ω・cm).

-Repeatability (Main unit):

+pH: ±0.02pH

+ORP: ±2mV

+Electrical conductivity: ±0.5%FS

+Electrical resistivity: ±0.5%FS

+Salinity: ±0.5% FS

+Temperature: ±0.2℃

-Temperature compensation:

+pH: Auto/Manual

+Electrical Conductivity/ Resistivity: Switch setting between Auto/Manual/None

+Temperature compensation method: Linear method

+Reference temperature : 25℃

+Temperature coefficient: 0-9.99% (optional setting) Not applied to ORP

-Calibration:

+pH: Capable of three-point calibration

+Electrical conductivity: Cell constant calibration

-Temperature Calibration: One-point calibration

-Data Memory: 1000 data points

-Auto Hold Function: Provided (Stability threshold : Fixed)

-Clock Function: Provided (To be shown while conducting a measurement)

-Interval Memory Function: Provided (Interval: The interval can be specified between 1 sec.-99 min. 59 sec. or 2 sec.-99hr. 59 min.)

-Printing Function: Can connect the external printer EPS-P30 (option)

-RS-232C Interface (non-isolated):

+Connectable Devices: PC or external printer EPS-P30 (option)

+Communication Specifications: Communication system: Start-stop synchronous method; Baud rate: 19,200 bps;

Character length: 8 bits; Parity: None; Stop bit: 1 bit

-Analog Output (non-isolated):

+Number of Outputs/Items:

ch1: Number of outputs: 3 Measured value, temperature, and range (only for electrical conductivity/resistivity)

ch2: Number of outputs: 2 Measured value and temperature

+Output Specification: pH: ±700mV (pH0-14); ORP : ±1V (0-±2000mV); resistivity/ salinity: 0-1V FS (each range);

Range: 100 mV/range; Temperature: 0-1V (0-100℃ )

-Waterproof Construction: IP67 (Enabled if the sensor is connected and if the external I/O portions are masked) (Can be immersed in water for 1m and 30 min.)

-Performance Compensation Temperature: 0-45℃

-Power Source: AA alkaline battery/nickel-hydrogen battery (2 pieces) or special AC adapter (6VA option)

-Power Consumption(If 3 volt battery is used)*2: Approx. 0.009W

-Battery Life: Approx. 600hours

-Outside Dimensions: Approx. 68 (w) x 35 (h) x 173 (d) mm

-Mass (Including Batteries): Approx. 300g

-Inluding:

+ Main unit

+ Conductivity Sensor: CT-27112B

+ pH Sensor: GST-2729C

+ Standard solution pH 6.86, 100mL

+ Standard solution pH 6.86, 100mL

+ Internal filling solution 50mL

+ Beakers (3 pcs)

+ Hand strap: OTZ00006

+ AA battery (2pcs)

+ Connector protective cap: OTD00001

+ Manual

-Tính năng:

+ Màn hình có 2 kênh, đo đồng thời và hiển thị độ pH/độ dẫn

+ Thiết kế tiết kiệm điện; pin có thể sạc lại được

+ Thiết kế chống thấm nước (IP67, ngâm sâu 1m, tối đa 30 phút)

+ Lưu trữ dữ liệu lên đến 1000 dữ điểm

+ PC và máy in ngoài có thể kết nối

Các hạng mục đo lường:

pH, ORP, độ dẫn điện, điện trở suất, độ mặn, nhiệt độ

(Điện cực ORP được bán riêng)

Ứng dụng: Dùng để độ dẫn điện, điện trở, độ mặn, pH, ORP, nhiệt độ trong phòng thí nghiệm

Datasheet


ຕິດຕາມຂ່າວສານ ແລະ ຂໍ້ສະເໜີ

ຮັບສ່ວນຫຼຸດພິເສດຕາມປະລິມານ, ອັບເດດລາຄາຂາຍສົ່ງ ແລະ ການແຈ້ງເຕືອນສິນຄ້າໃໝ່ສົ່ງກົງເຖິງອິນບັອກຂອງທ່ານ.

ໂດຍການສະໝັກສະມາຊິກ, ທ່ານຍອມຮັບ ເງື່ອນໄຂການໃຫ້ບໍລິການ ແລະ ນະໂຍບາຍຄວາມເປັນສ່ວນຕົວ ຂອງພວກເຮົາ.

ການຊ່ວຍເຫຼືໍາດ່ວນ

ເຂົ້າເຖິງຜູ້ຊ່ຽວຊານທີ່ໄດ້ຮັບການຢັ້ງຢືນຂອງພວກເຮົາໂດຍກົງ