ຮັບສ່ວນຫຼຸດພິເສດຕາມປະລິມານ, ອັບເດດລາຄາຂາຍສົ່ງ ແລະ ການແຈ້ງເຕືອນສິນຄ້າໃໝ່ສົ່ງກົງເຖິງອິນບັອກຂອງທ່ານ.
ໂດຍການສະໝັກສະມາຊິກ, ທ່ານຍອມຮັບ ເງື່ອນໄຂການໃຫ້ບໍລິການ ແລະ ນະໂຍບາຍຄວາມເປັນສ່ວນຕົວ ຂອງພວກເຮົາ.
ເຂົ້າເຖິງຜູ້ຊ່ຽວຊານທີ່ໄດ້ຮັບການຢັ້ງຢືນຂອງພວກເຮົາໂດຍກົງ
Optical Parameters(a)
Wavelength Range: 600 nm - 1080 nm
Dynamic Range: -60 dBm to +10 dBm (10-6 mW to 10 mW)
Sampling Rate
- Default(b): 30 Samples/s
- Maximum (c): 400 Samples/s
Measurable SOP(d): Entire Poincaré Sphere
Azimuth Accuracy(e): ±0.25°
Ellipticity Accuracy: ±0.25°
DOP(f) Accuracy: ±1.0%
Free Space Aperture: Ø3 mm
Input Fiber Connector: FC/PC Accepted by Included Ø12 mm Collimatorg
Included Ø12 mm Collimator(g): F240FC-B
Maximum Input Beam Divergence: 2°
Warm-Up Time for Rated Accuracy: 15 min
Additional Specifications
Command and Control Interface: USB 2.0 Mini-B
Input Power Supply: Via USB 2.0 Mini-B Interface or DS15 External Power Supplyh
DS15 Power Supply Ratings: 15.0V; 1.2A
Operating Temperature Range: 5°C to 40°C
Storage Temperature Range: -40°C to 70°C
Dimensions: 51.0 mm x 55.0 mm x 56.3 mm (2.01" x 2.17" 2.22")
Bottom Mounting Features: One 1/4"-20 (M6) and Two 8-32 (M4) Threaded Holes
Weight: 0.28 kg (0.62 lbs)
(a) All polarization specifications are valid for optical powers from -40 dBm to +3 dBm (0.0001 mW to 1.995 mW).
(b) Two samples per complete turn of the rotating quarter-wave plate are acquired and averaged. The motor drive speed is 60 Hz.
(c) One sample per half turn of the rotating quarter-wave plate and 200 Hz motor drive speed. Operating at this rate requires the polarimeter be powered using the included DS15 external power supply.
(d) SOP: States of Polarization
(e) For any SOP with -30° < Ellipticity < 30°
(f) DOP: Degree of Polarization
(g) If you would rather recieve a fiber collimator that accepts FC/APC connectors, please contact Tech Support. The F240APC series collimators for FC/APC connectors are also available separately.
(h) Power supplied via the USB port enables operation between 50 and 100 Samples/s. Use the included DS15 power supply to operate at higher rates.
Note: All technical specifications are valid at 23 ± 5°C and 45 ± 15% non-condensing relative humidity.
