THORLABS LCM10 ເຄື່ອງຕັດໄຟເບີເລເຊີ CO2 (10,6 µm)
Laser Wavelength: 10.6 µm
Laser Output Power: 40 W (Max)
Power Stability: ±5%
Duty Cycle: 0 - 99%
Maximum Fiber Size: Ø1.5 mm
Supported Connector Types (One Mount for Each Included): FC/PC and SC. MT. SMA. LC
Included Cannula Stops:
- Ø1.25 mm Cannula Stop (For LC Connector Mount)
- Ø2.5 mm Cannula Stop (For FC/PC & SC Connector Mount)
Cut Time, Fiber Diameter ≤ 600 µm: <4 seconds
Cut Time, Fiber Diameter > 600 µm: <8 seconds
Fiber Protrusion Distance (Before Cutting): 1 - 50 mm
Minimum Cut Height, 1.25 mm Ferrule(a): 60 - 90 µm
Minimum Cut Height, 2.5 mm Ferrule(a): 80 - 120 µm
Minimum Cut Height, 3.2 mm Ferrule(a): 120 - 160 µm
Cut Height Repeatability:±10 µm
Power Input: 90 - 264 VAC, 47 - 63 Hz. 8.2 A @ 115 VAC, 3.9 A @ 230 VAC
Operating Temperature: 15 to 40 °C
Storage Temperature: -20 to 60 °C
Operating Humidity: 0 to 75% Relative Humidity (Non-Condensing)
Storage Humidity: 0 to 90% Relative Humidity (Non-Condensing)
Altitude Range: 0 to 2000 m Above Sea Level
Dimensions (L x W x H)23.11" x 18.25" x 9.95" (586.9 mm x 463.6 mm x 252.7 mm)
Weight: 46.8 lbs (21 kg)
Packaged Weight: 64.8 lbs (29 kg)
(a) There is a range of minimum cut heights since the beam is conical, and the angle of the cone and the diameter of the ferrule determine how close the fiber can be cut
ຮັບສ່ວນຫຼຸດພິເສດຕາມປະລິມານ, ອັບເດດລາຄາຂາຍສົ່ງ ແລະ ການແຈ້ງເຕືອນສິນຄ້າໃໝ່ສົ່ງກົງເຖິງອິນບັອກຂອງທ່ານ.
ໂດຍການສະໝັກສະມາຊິກ, ທ່ານຍອມຮັບ ເງື່ອນໄຂການໃຫ້ບໍລິການ ແລະ ນະໂຍບາຍຄວາມເປັນສ່ວນຕົວ ຂອງພວກເຮົາ.
ເຂົ້າເຖິງຜູ້ຊ່ຽວຊານທີ່ໄດ້ຮັບການຢັ້ງຢືນຂອງພວກເຮົາໂດຍກົງ