Tektronix PSM3110 RF and Microwave Power Sensor / Power Meter (10 MHz - 8 GHz, 3.5 mm male ) | EMIN.COM.LA

Tektronix PSM3110 RF and Microwave Power Sensor / Power Meter (10 MHz - 8 GHz, 3.5 mm male )

Name: Tektronix PSM3110 RF and Microwave Power Sensor / Power Meter (10 MHz - 8 GHz, 3.5 mm male )
Brand: TEKTRONIX

ຜູ້ຜະລິດTEKTRONIX

ModelPSM3110

ຕິດຕໍ່

ຈຳນວນ

ການຊຳລະເງິນທີ່ປອດໄພ

ການຮັບປະກັນຄຸນນະພາບ

ປ່ຽນ ແລະ ສົ່ງຄືນງ່າຍ

ມີບໍລິການຈັດສົ່ງ

Manufacturer Tektronix
Model: PSM3110

Datasheet

PSM3000 Series USB Power Meters (True Average)

Characteristic	PSM3110	PSM3120	PSM3310	PSM3320	PSM3510
Input Connector	3.5 mm, male	N-type, male	3.5 mm, male	N-type, male	3.5 mm, male
Frequency Range	10 MHz to 8 GHz		10 MHz to 18 GHz		10 MHz to 26.5 GHz
Dynamic Range	–55 dBm to +20 dBm
Video Bandwidth	100 Hz, typical
Total Accuracy*¹	Total Uncertainty = 2 × √[ (CF/2)² + (L/2)² + (N/2)² + (Z/√2)²+ (Mm/√2)² + (T/√2)² ]
Calibration Factor Uncertainty (CF)	10 MHz to 1 GHz: 2.5% 1 GHz to 8 GHz: 2.4%	10 MHz to 1 GHz: 1.8% 1 GHz to 8 GHz: 1.7%	10 MHz to 1 GHz: 2.5% 1 GHz to 10 GHz: 2.4% 10 GHz to 18 GHz: 2.7%	10 MHz to 1 GHz: 1.8% 1 GHz to 10 GHz: 1.7% 10 GHz to 18 GHz: 1.9%	10 MHz to 1 GHz: 2.5% 1 GHz to 10 GHz: 2.4% 10 GHz to 18 GHz: 2.7% 18 GHz to 26.5 GHz: 3.7%
Linearity Uncertainty (L)	+15 dBm to +20 dBm: 3.0% –15 dBm to +15 dBm: 2.5% –55 dBm to –15 dBm: 2.0%
Noise Uncertainty (N)	5 second integration +10 dBm to +20 dBm: 0.10% –15 dBm to +10 dBm: 0.25% –30 dBm to –15 dBm: 0.10% –40 dBm to –30 dBm: 0.25% –50 dBm to –40 dBm: 1.50% –55 dBm to –50 dBm: 4.50%
Zero Offset Power*² (Z)	[(3.0 nW at 25 °C) + \|ΔT\| × (0.15 nW / °C)] + 0.01 nW / month
Match*³	1.20:1 VSWR (21 dB Return Loss)		10 MHz to 10 GHz: 1.20:1 VSWR (21 dB Return Loss) 10 GHz to 18 GHz: 1.29:1 VSWR (18 dB Return Loss)		10 MHz to 10 GHz: 1.20:1 VSWR (21 dB Return Loss) 10 GHz to 26.5 GHz: 1.29:1 VSWR (18 dB Return Loss)
Temperature Uncertainty (T)	40 °C < T ≤ 50 °C: 2.00% 30 °C < T ≤ 40 °C: 0.75% 20 °C < T ≤ 30 °C: 0.00% 10 °C < T ≤ 20 °C: 0.75% 0 °C < T ≤ 10 °C: 2.00%

*¹ Total uncertainty includes contributions from Calibration Factor Uncertainty (CF), Linearity Uncertainty (L), Noise Uncertainty (N), Zero Offset Uncertainty (Z), Mismatch Uncertainty, and Temperature Uncertainty (T). All error terms must be converted to percentages for Total Uncertainty (RSS) calculation. Mismatch Uncertainty (Mm) requires knowledge of source match and should be expressed as a percentage using the equation Mm = 100 × [(1 ± Γ_source × Γ_sensor)² – 1].

*² Use the following formula to determine Zero Offset Uncertainty as a percentage: Z = (Zero Offset Power / Nominal Power) × 100.

*³Nominal impedance = 50 Ω.