ຮັບສ່ວນຫຼຸດພິເສດຕາມປະລິມານ, ອັບເດດລາຄາຂາຍສົ່ງ ແລະ ການແຈ້ງເຕືອນສິນຄ້າໃໝ່ສົ່ງກົງເຖິງອິນບັອກຂອງທ່ານ.
ໂດຍການສະໝັກສະມາຊິກ, ທ່ານຍອມຮັບ ເງື່ອນໄຂການໃຫ້ບໍລິການ ແລະ ນະໂຍບາຍຄວາມເປັນສ່ວນຕົວ ຂອງພວກເຮົາ.
ເຂົ້າເຖິງຜູ້ຊ່ຽວຊານທີ່ໄດ້ຮັບການຢັ້ງຢືນຂອງພວກເຮົາໂດຍກົງ
AC Current Output (1 Hz - 10 kHz): Max. 10 A (peak-peak)
AC Current Output (100 mHz - 1 Hz): Max. 10 A (peak-peak)
AC Current Output (10 mHz - 100 mHz): Max. 5 A (peak-peak), depending on the cell voltage
AC Current Output (1 mHz - 10 mHz): Max. 2.5 A (peak-peak)
AC Excitation: Parallel multi-sine operation, up to 32 frequency points
DC Current Output (charge and discharge option): Max. ±1 A
BIM measurement charge/discharge - BIM measurement during temperature change: Yes. An impedance measurement can be performed in parallel during charging and discharging or temperature change tests, but care must be taken to select the lowest frequency and the excitation periods so that the state of the battery does not change significantly during the BIM measurement.
DC Voltage Range: 0 - 5 V
Frequency Range: 1 mHz - 10 kHz, the AC excitation frequency limits the AC excitation current. In the range of 1 Hz - 10 kHz the maximum current is limited to 10 A (peak-peak) and in frequencies below <1 Hz, the maximum current is limited to 5 A (peak-peak).
Frequency Accuracy: 100 ppm
Impedance Range: 0.1 mΩ to 100 mΩ
Interfaces: USB, CAN (free configurable)
Temperature Measurement Unit: 1 (PT100, 4-wire measurement)
Temperature channels: 20 (multiplexed)
Voltage Input Resolution (DC): < 0.5 mV
Voltage Input Resolution (AC): < 2 μV
Accuracy |Z| (typical, after calibration): < 1 %
Accuracy arg (Z) (typical, after calibration): < 0.5, depending on the cell voltage
Input Power: < 60 W
Input Voltage: 100 - 230 V AC
Dimensions (W x D x H): 19" x 19.7" x 5.25" (19" x 50 cm x 3U)
Ambient Temperature: +10°C to +30°C
