TAITEC M-600FD ຫ້ອງອຸນຫະພູມຄົງທີ່ (ຂະໜາດໃຫຍ່) (0℃ ~ +45℃)

Temperature range: 0℃ to 45℃

Temp. control accuracy: Up to 2.0°C (*1, 2, 3)

Chamber volume: Approx. 642L

Temp. display/Temp. setting method: Digital display/UP/DOWN method

Heater: 200 W, ON/OFF can be arbitrary turned.

Compressor: 200 W (R-134a), ON/OFF can be arbitrary turned.

Outlet inside chamber: Outlet: 2-Socket × 1 (Drip-proof-type, 5 A in total)

Connecting hole: Left side (φ36 mm)

Circulating method inside the chamber: Circulating by fan motors

Num. of Shelf/Allowable weight: 2 rows x 3 levels/50kg each (Equal weight)

Interior/Exterior material: Stainless steel (except for some part)

Safe devices: Thermostat, Earth leakage breaker

Dimensions inside chamber: 798(W) x 650(D) x 1428(H)mm

Int. Dimension: 900(W) x 800(D) x 1905(H)mm

Weight: Approx. 120kg

Power supply: AC100V/7A /Max.12A (Need a step-down transformer)(*4)

Standard accessories/Others: Shelf × 6 pcs, Pallet × 2 pcs, Drip tray × 1 pc, and Drainage trap on the bottom

Catalog

(*1)The value under ambient temperature 25℃. Useable ambient temperature is 5℃ to 30℃.

(*2)If the set temperature in the chamber is higher than 5℃ above the room temperature, turn the REF. switch OFF. If the set temperature in the chamber is 5℃ or lower than the room temperature, turn the HEAT switch OFF.

(*3)Temperature change immediately after operating the defrosting function is not taken into account.

(*4)When the outlet inside the chamber is used, the power will increase according to the power supply capacity of the device used