TAITEC CH-602N ເຄື່ອງທຳຄວາມເຢັນສຳລັບອຸດສາຫະກຳ (-10℃ ~ +80℃; ±0.5℃; 600W, R404A)

Temperature range (*1): -10℃ to +80℃

Ambient temperature range: +5℃ to +35℃

Control accuracy (*2): ±0.5℃, Heater PID control

Compressor output, Refrigerant: 600W, R404A

Cooling capacity (at 50Hz)(*3): approx. 1.0kW

Heater output: 2.25kW

Temperature setting display: Digital system (setting/display switching system)

Safety device/function: Short/Over current breaker, Alarm and warning for compressor, High and Low temperature, Alarm and warning for pump motor, Temperature sensor abnormality diagnosis circuit, Alarm for replenishing liquid, Low-water cut off, Phase-reversal relay

Other Functions: Temperature check monitor, Remote temperature setting, Temperature monitor signal output, Safety device actuation signal output, External temperature sensor connection (*4)

Water bath capacity (*5): approx. 26L (water level 80%)

Applicable pump unit: P-320, P-420, P-52

External dimensions (Pump unit not included): 407×565×766H mm

Weight (Pump unit not included): approx. 68kg

Power Supply (Pump unit not included): Three-phaseAC200V/15A 50/60Hz,MAX17A: Need a step-down transformer

Operation current (Pump unit not included): 17A

Standard Accessory: Power code, Drain hose x 1, Connector for signal x 1

Catalog

(*1)When setting below +7ºC, please be sure to use antifreeze (Please ask us for details).

(*2)Performance may not be maintained due to the heating medium, environmental temperature, heat load, circulation pipe distance, etc.

(*3)Capacity when using tap water and the circulating fluid temperature at 10 ℃ . The capacity varies with the pump unit mounted.The capacity decreases when the ambient temperature is above +30℃

(*4)External temperature sensor (φ4×250mm) is available as an option.

(*5)Due to the structure not being sealed, the circulation liquid may evaporate and reduce depending on the set temperature and heating medium type.