ຮັບສ່ວນຫຼຸດພິເສດຕາມປະລິມານ, ອັບເດດລາຄາຂາຍສົ່ງ ແລະ ການແຈ້ງເຕືອນສິນຄ້າໃໝ່ສົ່ງກົງເຖິງອິນບັອກຂອງທ່ານ.
ໂດຍການສະໝັກສະມາຊິກ, ທ່ານຍອມຮັບ ເງື່ອນໄຂການໃຫ້ບໍລິການ ແລະ ນະໂຍບາຍຄວາມເປັນສ່ວນຕົວ ຂອງພວກເຮົາ.
ເຂົ້າເຖິງຜູ້ຊ່ຽວຊານທີ່ໄດ້ຮັບການຢັ້ງຢືນຂອງພວກເຮົາໂດຍກົງ
Logger Capacity: 15,999 data points (5,333 per sensor)
CO2 Range: 0 to 9999 ppm
CO2 Accuracy: ±50 ppm ±5% of reading from 0 to 2000 ppm, else unspecified
Pressure Dependence: +0.16% of reading per 1 hPa deviation from normal pressure of 1000 hPa
Temperature Range: 14 to 140°F (-10 to 60°C)
Temperature Accuracy: ±1.0°F (±0.6°C)
Humidity Range: 5.0 to 95.0% RH (avoid condensation)
Humidity Accuracy: ±3% RH at 77°F (25°C) (10 to 90% RH, else ±5% RH)
Warm up: 30 seconds
Power Supply: 100-240VAC adapter to 5VDC 500mA
Dimensions (w/o A/C adapter): 4.75x4x4in (12x10.5x10.5cm)
WatchDog A160 Temp/RH/CO2 Data Logger is a cost effective choice for recording environmental conditions. This data logger measures Temperature, Relative Humidity and Carbon Dioxide. Data is shown on the LCD display. Log 8,000 measurements (4,000 per channel using both channels). Select measurement intervals from 1-120 minutes. A 30 minute interval will record for 111 days before the memory is full. Removable soft caps keep ports clear of debris. View data by connecting the logger to your PC with the WatchDog PC Connection cable (Item #3661A) to download into our SpecWare Software (required with purchase)
Manual
Catalog
