SMAC CWZ61200 ກົນຈັກໜັກ

Capacity

Max.swing over bed: 2000mm

Max.swing over cross slide: 1650mm

Center distance3m, 4m, 5m, 6m, 8m, 10m, 12m, 16mm

Max.weight of workpiece: 32T

Width of bed: 1600mm

Head Stock

Spindle hole: 85mm

Spindle taper: F120mm 1:7

Spindle speeds: 0.86-160 r/min

Gear box-threads & feeds

Metric threads range (pitch): 2-40mm

Inch threads range (inch): 1-14

Worm gear threads rang (module): 1.5-20mm

Longitudinal feeds range: 0.125-4.8mm

Cross feed range: 0.063-2.4mm

Rapid feed: Longitudinal / Cross: 3000mm/min, 1500mm/min

Tool-Post

Tool section: 70x70mm

Carriage

Cross slide travel: 725mm

Middle slide travel: 600mm

Tailstock

Sleeve diameter: 300mm

Sleev taper: F100 1:7

Sleeve travel: 300mm

Steady Rest

Close-type steady rest: F400-750mm

Open-type steady rest: F650-1200mm

Motor

Main motor: 80kw

Rapid feed motor: 1.5kw

Tailstock motor: 1.5kw

Net weight(kg) / Dimenusion (LxWxH) / Center distance:

3000mm / 37500kg / 8577x2480x2280mm

4000mm / 39000kg / 9577x2480x2280mm

5000mm / 40500kg / 10577x2480x2280mm

6000mm / 40500kg / 10577x2480x2280mm

8000mm / 40500kg / 10577x2480x2280mm

10000mm / 42000kg / 11577x2480x2280mm

45000kg / 13577x2480x2280mm

48000kg / 15577x2480x2280mm

12000mm / 52000kg / 17577x2480x2280mm

16000mm / 58000kg / 21577x2480x2280mm

Standard Accessories: 4-jaw chuck, Centre, Lighting unit, Cooling unit, Special tools, Motorized tailstock

Optional Accessories: 4-jaw chuck, Centre, Steady rest, Follower rest, Roller supprter, Taper turning device, Digital-display unit, Grinding or Milling head device, Boring device