ຮັບສ່ວນຫຼຸດພິເສດຕາມປະລິມານ, ອັບເດດລາຄາຂາຍສົ່ງ ແລະ ການແຈ້ງເຕືອນສິນຄ້າໃໝ່ສົ່ງກົງເຖິງອິນບັອກຂອງທ່ານ.
ໂດຍການສະໝັກສະມາຊິກ, ທ່ານຍອມຮັບ ເງື່ອນໄຂການໃຫ້ບໍລິການ ແລະ ນະໂຍບາຍຄວາມເປັນສ່ວນຕົວ ຂອງພວກເຮົາ.
ເຂົ້າເຖິງຜູ້ຊ່ຽວຊານທີ່ໄດ້ຮັບການຢັ້ງຢືນຂອງພວກເຮົາໂດຍກົງ
Max. test force: 5KN
Precision: 1%
Measuring range of load: 1%-100% of max. force
Relative error of indicating value of test force: 1%
Resolution of test force: 1/300000
Measuring range of deformation: 2%-100%
Adjusting range of load control rate: 0.005%-5%FS/S
Precision of load control rate: When rate is less than 0.05%FS, the precision is 1%
When rate is more than 0.05%FS, the precision is 0.5%
Adjusting range of deformation rate: 0.005-5%FS/S
Precision of deformation rate: When rate is less than 0.05%FS/s, the precision is 1%
When rate is more than 0.05FS/s, the precision is 0.5%
Adjusting range of displacement: 0.5-500mm/min
Precision of displacement rate: 0.2%
Range of constant load, constant deformation,constant displacement: 0.5%-100%FS
Precision of constant load, constant deformation, constant displacement:
When the set value is more than 10%FS, the precision is 0.5%
When the set value is less than 10%FS, the precision is 1%
Distance between columns: 900mm
Voltage and power(should connect to the ground): 220V, 50Hz, 400W
Configuration of the machine:
Main machine: Door structure 1 set
Precise ball screw: Taiwan TBI 2 pairs
Load cell: 5KN 1 PC
Hand control box: Control the moving of crossbeam 1 PC
Tensile accessories: Wedge clamping body 1 set
