ຮັບສ່ວນຫຼຸດພິເສດຕາມປະລິມານ, ອັບເດດລາຄາຂາຍສົ່ງ ແລະ ການແຈ້ງເຕືອນສິນຄ້າໃໝ່ສົ່ງກົງເຖິງອິນບັອກຂອງທ່ານ.
ໂດຍການສະໝັກສະມາຊິກ, ທ່ານຍອມຮັບ ເງື່ອນໄຂການໃຫ້ບໍລິການ ແລະ ນະໂຍບາຍຄວາມເປັນສ່ວນຕົວ ຂອງພວກເຮົາ.
ເຂົ້າເຖິງຜູ້ຊ່ຽວຊານທີ່ໄດ້ຮັບການຢັ້ງຢືນຂອງພວກເຮົາໂດຍກົງ
Probe diameter: Ø 15 mm
Probe length: 65 mm
Probe length with filter carrier: 108 mm
Sensor element: HYGROMER HH1-SK
Type: Humidity-Temperature Probe for HH
Temperature sensor: PT100 1/3 Class B
Peak load H₂O₂: 880 ppm / 1200 mg/m³
Operating humidity: 0…100 %rh
Operating temperature: 0…60 °C
Accuracy @ 10…30 °C (before and after diffusion phase): ±1.0 %rh, ±0.1 K
Analogue output: 2 × 0…1 V DC
Analogue output parameters:
Humidity (default)
Temperature (default)
Dew point (setting with HygroSoft)
Frost point (setting with HygroSoft)
Analogue output scaling:
Humidity (0…100 %rh = 0…1 V)
Temperature (–40…60 °C = 0…1 V)
Freely settable with HygroSoft
Timing: Measurement interval of 1 s
Air Chip 3000: Saves adjustment data so that probes can be interchanged without re-adjusting
Housing material: Polycarbonate / Stainless steel 1.4301
Filter: No filter
Audit trail: FDA CFR21 Part 11 / GAMP compatible
