ຮັບສ່ວນຫຼຸດພິເສດຕາມປະລິມານ, ອັບເດດລາຄາຂາຍສົ່ງ ແລະ ການແຈ້ງເຕືອນສິນຄ້າໃໝ່ສົ່ງກົງເຖິງອິນບັອກຂອງທ່ານ.
ໂດຍການສະໝັກສະມາຊິກ, ທ່ານຍອມຮັບ ເງື່ອນໄຂການໃຫ້ບໍລິການ ແລະ ນະໂຍບາຍຄວາມເປັນສ່ວນຕົວ ຂອງພວກເຮົາ.
ເຂົ້າເຖິງຜູ້ຊ່ຽວຊານທີ່ໄດ້ຮັບການຢັ້ງຢືນຂອງພວກເຮົາໂດຍກົງ
Exerciser:
Interfaces supported: l2CorSPI
Configurable: 112C Master + 3 I2C Slaves OR; 1SPI Master+1SPI Slave
I2C/SPI Traffic Generation: Custom I2C/SPI traffic generation
Clock Frequency: Upto 3.4 MHz for I2C; Variable up to 32 MHz, Fixed Up to 50 MHz for SPI
FIFO Capacity: I2C: Yes, 8K read and 8K write on master & IK on Slave.
Voltage Drive Level: 1V to 3.3V for I2C. 1V to 3.3V for SPI. Variable in steps of lOOmV
Command sequence Support: All command sequence is supported *
Clock Duty Cycle variation: User Define for I2C. 25%, 50%, or 75% for SPI
Clock & Data Delay: User defined for I2C. User defined for SPI. *
Delay between two messages: Customisable Delay
API Support: I2C: Yes. SPI: Yes.
Protocol Analysis:
Supports: I2C/SPI protocol decode
Protocol Views:
+ Timing Diagram View
+ Protocol Listing View
+ Bus-Diagram to display Protocol packets with timing diagram plot
Protocol Trigger: I2C Trigger Capabilities:
• Auto Trigger
• Message trigger- Trigger Slave Address for write or read command on NACK and Trigger Slave Address and Data for Write or Read command on ACK.
• Advanced multi-level, multiple condition trigger.
Capture Duration: Continuous streaming Protocol Data *
Report Generation: CSV/PDF format
Host Connectivity: USB 3.0 / 2.0 interface
Dimension: 157mm x 90.2mm x 26.6mm
Net Weight: 290 gms /0.63 lbs
Gross Weight: 1.05 kg /2.31lbs
