ຮັບສ່ວນຫຼຸດພິເສດຕາມປະລິມານ, ອັບເດດລາຄາຂາຍສົ່ງ ແລະ ການແຈ້ງເຕືອນສິນຄ້າໃໝ່ສົ່ງກົງເຖິງອິນບັອກຂອງທ່ານ.
ໂດຍການສະໝັກສະມາຊິກ, ທ່ານຍອມຮັບ ເງື່ອນໄຂການໃຫ້ບໍລິການ ແລະ ນະໂຍບາຍຄວາມເປັນສ່ວນຕົວ ຂອງພວກເຮົາ.
ເຂົ້າເຖິງຜູ້ຊ່ຽວຊານທີ່ໄດ້ຮັບການຢັ້ງຢືນຂອງພວກເຮົາໂດຍກົງ
Application:
+ Estimation of the likelihood of corrosion
+ Indication of corrosion rate
+ Correlation to chloride permeability
+ On site assessment of curing efficiency
+ Determination of zonal requirements for cathodic protection systems
+ Identification of wet and dry areas in a concrete structure
+ Indication of variations in the water/ cement ratios within a concrete structure
+ Identification of areas within a structure most susceptible to chloride penetration
+ Correlation to early compressive strength
+ Correlation to water permeability of rock
Techniacal Data
+ Resolution (nominal current 200µA): ±0.2 kΩcm or ±1% (whichever is greater)
+ Resolution (nominal current 50µA): ±0.3 kΩcm or ±2% (whichever is greater)
+ Resolution (nominal current <50µA): ±2 kΩcm or ±5% (whichever is greater)
+ Frequency: 40 Hz
+ Memory: Non volatile, ca. 500 measured values
+ Power Supply: >50 hours autonomy
+ Charger connection: USB type B, (5V, 100mA)
+ Dimensions: 197 x 53 x 69.7 mm (7.8 x 2.1 x 2.7 inch)
+ Weight: 318 g (11.2 oz)
+ Operating temperature: 0° to 50°C (32° to 122°F)
+ Storage temperature: -10° to 70°C (14° to 158°F)
Accessories:
Resipod, 50mm probe spacing, test strip, foam contact pads, charger
with USB cable, software, carrying strap, documentation and case.
