ຮັບສ່ວນຫຼຸດພິເສດຕາມປະລິມານ, ອັບເດດລາຄາຂາຍສົ່ງ ແລະ ການແຈ້ງເຕືອນສິນຄ້າໃໝ່ສົ່ງກົງເຖິງອິນບັອກຂອງທ່ານ.
ໂດຍການສະໝັກສະມາຊິກ, ທ່ານຍອມຮັບ ເງື່ອນໄຂການໃຫ້ບໍລິການ ແລະ ນະໂຍບາຍຄວາມເປັນສ່ວນຕົວ ຂອງພວກເຮົາ.
ເຂົ້າເຖິງຜູ້ຊ່ຽວຊານທີ່ໄດ້ຮັບການຢັ້ງຢືນຂອງພວກເຮົາໂດຍກົງ
Manufacturer: PCE-ANH
Model : PCE-UTU 30
Warranty : 12 months
Specification
Rated load: 30000 N
Accuracy class: 0.5 / EN 7500-1
Drive: controlled DC motor
Test speed: 0.001 ... 500 mm/min, Resolution: 1 µm
Distance measurement: incremental
Standard stroke: 1000 mm (Without tensioning and tensioning adapters)
Work-life: 450 mm
Supply: 230 V AC, 50 Hz
Framework:
2 ground guide columns
2 ball circulating spindles
Column cover with bellows seal
Limit switch for travel limit
Powder coated housing parts
Colour: RAL 7035
Safety devices:
Enclosure from Makrolon
Safety switching contact
Measurements: HxWxD 1330 x 650 x 530 mm
Weight: ca. 140 kg
Force transducer for UPM
Installed underneath the mobile traverse for compressive and tensile forces.
Measuring range: 600 ... 30000 N
Nominal value: 2 mV/V
Relative characteristic deviation: ≤ ±0.1 %
Relative linearity deviation: ≤ ±0.02 %
Relative creep error: ≤ ±0.03 % after 30 min
≤ ±0.07 % after 8 h
Accuracy class: to EN ISO 7500-1, Class 0.5
Overload: 50 %
Protection class: IP 67
TEDS module: integrated, to IEEE 1451-4
automatic sensor detection
Control and evaluation electronics
Measured value acquisition: 1 kHz
Display: LC-Display
Interface: RS-232
Functions:
Force regulation
Distance regulation
Manual positioning
Processing of a programmed sequence
Specification of the crosshead speed
Return to the starting position
Cycles
Presetting limits for force / distance / time
Resetting the force / distance indicator to 0
Adjustable control factor
Breaking recognition
Maximum value memory
For 2 force transducer: choice of the work area
Intelligent measuring and control electronics
Processor: 32 bit RISC architecture
Control circuit: > 1 kHz
TEDS module:
Automatic sensor detection
Standard IEEE 1451-4
Interface: USB 2.0
A/D converter: 2 x 24 bit A/D converter for strain gauge transducers
Sampling rate: > 50 kHz
2 x 10 bit A/D converter for processing additional signals
Sampling rate: > 50 kHz
1 x Incremental signal input for distance / angle measurement
Software
Functions:
- Toolbox for free programming of test sequences
- Toolbox for free programming of calculations
- Freely configurable real-time graph with three axis overlay, free scaling and manual evaluation function
- Freely configurable report format with integration of image files
- Order and lot-bound storage or export of test sequences, calculation results and raw material data
- Integrated user management
- Can be automated
- Networkable
- Multilingual
- Machine-bound license, multi workplace
Basic configuration for material testing:
1 x Test template for tensile tests
1 x Test template for compressive, flexural or alternating load tests
1 x Test template for testing compression or tension springs
Delivery contents
1 x material test stand PCE-UTU 30
1 x force transducer (including mounting material, plug, socket and cabling)
1 x control and evaluation electronics
1 x intelligent measuring and control technology (including slave module)
1 x software
1 x instruction manual
