ຮັບສ່ວນຫຼຸດພິເສດຕາມປະລິມານ, ອັບເດດລາຄາຂາຍສົ່ງ ແລະ ການແຈ້ງເຕືອນສິນຄ້າໃໝ່ສົ່ງກົງເຖິງອິນບັອກຂອງທ່ານ.
ໂດຍການສະໝັກສະມາຊິກ, ທ່ານຍອມຮັບ ເງື່ອນໄຂການໃຫ້ບໍລິການ ແລະ ນະໂຍບາຍຄວາມເປັນສ່ວນຕົວ ຂອງພວກເຮົາ.
ເຂົ້າເຖິງຜູ້ຊ່ຽວຊານທີ່ໄດ້ຮັບການຢັ້ງຢືນຂອງພວກເຮົາໂດຍກົງ
Measuring range: 0 ...10 m / 0 ... 32.8 ft*
Accuracy: 0.5 %
Resolution: 0.001 m
Minimum distance to the wall: 1 m / 3.3 ft
Resolution of the temperature display: 0.1 °C
Output signal: 4 ... 20 mA
Output signal resolution: 0.01 mA
Connection: 2-wire, PE
Power supply: 24 V DC
Protection class: IP 66
Connection thread: M60
Connection thread cable glands: M18 x 1.5
Ambient conditions: -20 ... 60 °C / -4 ... 140 °F
Dimensions: 110 x 140 x 215 mm / 4.3 x 5.5 x 8.5"
Weight: ca. 825 g / 1.8 lbs
*the measuring range only applies under the following conditions:
- the measuring medium is a liquid
- there are no turbulences
- there are no dusts or vapors between the medium and the sensor
- the temperature difference between the sensor and the medium is <20 °C / 68 °F
Digital display PCE-N24S
Input (selectable):
0 ... 20 mA
4 ... 20 mA
0 ... 60 mV
0 ... 10 V
± 60 mV
± 10 V
Accuracy: ± (0.2 % full scale + 1 dgt.)
Internal resistance: 10 Ω ± 1 %
Scaling: 2-point
Display: 4-digit 7-segment LED display, height: 20 mm / 0.78"
Display range: -1999 ... 9999
Ambient temperature:
in operation: -10 °C ... 55 °C / 14 °F ... 131 °F
Storage: -25 °C ... +85 °C / -13 °F ... 185 °F
Dimensions: 96 mm x 48 mm x 64 mm / 3.77 x 1.88 x 2.51"
Control panel cut-out: 92 mm x 45 mm / 3.6 x 1.7" (according to DIN)
Supply voltage (selectable):
230 V AC
110 V AC
24 V AC
85 ... 253 V AC / DC
20 ... 40 V AC / DC
Sensor supply (selectable): 24 V DC / 30 mA
Degree of protection: front: IP 65
Weight: < 200 g / 7 oz
Mounting: mounting clips with clamping screws
Connection: via terminal strip
Housing: robust plastic housing
Delivery Scope:
1 x Level indicator PCE-ULM-10-N24S
1 x Built-in display PCE-N24S
4 x Mounting hardware
1 x Gasket
1 x Instruction Manual
NB: The display is delivered in the selected configuration without scaling of the measurement signal. The programming adapter PCE-PD14 is required to scale the display device!
