ຮັບສ່ວນຫຼຸດພິເສດຕາມປະລິມານ, ອັບເດດລາຄາຂາຍສົ່ງ ແລະ ການແຈ້ງເຕືອນສິນຄ້າໃໝ່ສົ່ງກົງເຖິງອິນບັອກຂອງທ່ານ.
ໂດຍການສະໝັກສະມາຊິກ, ທ່ານຍອມຮັບ ເງື່ອນໄຂການໃຫ້ບໍລິການ ແລະ ນະໂຍບາຍຄວາມເປັນສ່ວນຕົວ ຂອງພວກເຮົາ.
ເຂົ້າເຖິງຜູ້ຊ່ຽວຊານທີ່ໄດ້ຮັບການຢັ້ງຢືນຂອງພວກເຮົາໂດຍກົງ
Measuring range: to 60 microns thickness
Number of teeth: 6 or 11 (depending on the version)
Average distance: 1 ... 3 mm (depending on the version)
Choosing the right cross-cut method:
- Method A (X-cut) for testing to ASTM D 3359 with layer thickness> 125 µm
- Method B (crosshatch Cross) for testing to ISO 2409 with thickness 0 ... 250 µm and ASTM D 3359 with thickness <125 µm
Choosing the right cut distance (Method B): To EN DIN ISO 2409
Layer thickness Substratum Average distance
0...60 µm Hard 1 mm
0...60 µm Soft 2 mm
Approx. 60...120 µm Hard or soft 2 mm
Approx. 120...250 µm Hard or soft 3 mm
To ASTM D 3359
Layer thickness Average distance
0 ... 50 µm 1 mm
50 ... 125 µm 2 mm
Delivery Scope:
1 x Material Tester PCE-CRC 10 with selected blade
1 x Allen key for blade change
1 x Brush to remove loose particles
1 x Duct tape
1 x Transport case
1 x Instruction manual
