ຮັບສ່ວນຫຼຸດພິເສດຕາມປະລິມານ, ອັບເດດລາຄາຂາຍສົ່ງ ແລະ ການແຈ້ງເຕືອນສິນຄ້າໃໝ່ສົ່ງກົງເຖິງອິນບັອກຂອງທ່ານ.
ໂດຍການສະໝັກສະມາຊິກ, ທ່ານຍອມຮັບ ເງື່ອນໄຂການໃຫ້ບໍລິການ ແລະ ນະໂຍບາຍຄວາມເປັນສ່ວນຕົວ ຂອງພວກເຮົາ.
ເຂົ້າເຖິງຜູ້ຊ່ຽວຊານທີ່ໄດ້ຮັບການຢັ້ງຢືນຂອງພວກເຮົາໂດຍກົງ
ຮັບສ່ວນຫຼຸດພິເສດຕາມປະລິມານ, ອັບເດດລາຄາຂາຍສົ່ງ ແລະ ການແຈ້ງເຕືອນສິນຄ້າໃໝ່ສົ່ງກົງເຖິງອິນບັອກຂອງທ່ານ.
ໂດຍການສະໝັກສະມາຊິກ, ທ່ານຍອມຮັບ ເງື່ອນໄຂການໃຫ້ບໍລິການ ແລະ ນະໂຍບາຍຄວາມເປັນສ່ວນຕົວ ຂອງພວກເຮົາ.
ເຂົ້າເຖິງຜູ້ຊ່ຽວຊານທີ່ໄດ້ຮັບການຢັ້ງຢືນຂອງພວກເຮົາໂດຍກົງ
MTBF: 100,000 hours
Shock: 100 g, 11 ms, half sine wave without damage
Weight: 5 g
Accuracy: ± 0.25 %
Vibration: At 35 g peak sinusoidal vibration from 10Hz to 2000 Hz {½" D.A.), the output shall not exceed 0.04% FSO/g for 15 psi range, decreasing to 0.005% FSO/g for 100 psi and above. Natural Frequency: >35 kHz for 100 psi range
Accuracy Note: ± 0.25% FSO combined lineartiy, hysteresis, and repeatabiltiy
Output Signal: Millivolt
Pressure Type: Absolute
Pressure, Max: 20 psi
Pressure, Min: 0 psi
Accuracy Class: 0.1% to 0.25%
Burst Pressure: 3x Full Scale
Proof Pressure: 2.5x Full Scale
Supply Voltage: 10 Vdc
Sensing Element: 4-active-arm Strain Gauge Bridge
Input Resistance: 2000 Ω
Electrical Output: 30 mV/V
Materials, Wetted: Epoxy, Kovar, Nitride, Pyrex glass
Output Resistance: 1000 to 1500 Ω
Zero/Balance Error: 0 mV ± 5% FSO
Burst Pressure Note: 300% rated pressure, 500 psi max
Proof Pressure Note: 250% rated pressure, 500 psi max, will not cause changes in performance beyond specified tolerance
Sensing Element Note: 4-active-arm Bridge using a micro-machined diffused silicon diaphragm sensor and thin-film media and dielectric isolation barriers.
Electrical Connection: T-08
Insulation Resistance: 100 MΩ @ 50 Vdc
Electrical Output Note: 30 mV ± 10%@ 10 Vdc
Process Connection Size: 3/16 in
Process Connection Type: Stem
Operating Temperature, Max: 150 °C
Operating Temperature, Min: -55 °C
Compensated Temperature, Max: 121 °C
Compensated Temperature, Min: -55 °C
Thermal Effect on Span error, Max: ± 0.036% FSO/°C
Thermal Effect on Zero error, Max: ± 0.036% FSO/°C, ± 0.036% FSO/°C