ຮັບສ່ວນຫຼຸດພິເສດຕາມປະລິມານ, ອັບເດດລາຄາຂາຍສົ່ງ ແລະ ການແຈ້ງເຕືອນສິນຄ້າໃໝ່ສົ່ງກົງເຖິງອິນບັອກຂອງທ່ານ.
ໂດຍການສະໝັກສະມາຊິກ, ທ່ານຍອມຮັບ ເງື່ອນໄຂການໃຫ້ບໍລິການ ແລະ ນະໂຍບາຍຄວາມເປັນສ່ວນຕົວ ຂອງພວກເຮົາ.
ເຂົ້າເຖິງຜູ້ຊ່ຽວຊານທີ່ໄດ້ຮັບການຢັ້ງຢືນຂອງພວກເຮົາໂດຍກົງ
Shock: 50 g, 11 ms half-sine
Weight: 200 g
Accuracy: ± 0.05 %
Bandwidth: DC to 1 kHz
Stability: ± 0.1%
Vibration: 5-2000-5 Hz, 30 minute cycle,Curve L, Mil-Spec 810 figure 514-2-2, vertical and horizontal axis
Compliance: RoHS 2
Accuracy Note: (CombinedLinearity,Hysteresis and Repeatability)
Output Signal: Voltage
Pressure Type: Gauge
Pressure, Max: 15 psi
Pressure, Min: 0 psi
Response Time: <1 ms
Accuracy Class: < 0.1%
Burst Pressure: 4x Full Scale
Proof Pressure: Up to 3000 psi
Stability Note: Long Term Stability (1-Year): ± 0.1% FS typical
Supply Voltage: 15 to 30 Vdc
Pressure Cycles: 1 million, minimum
Electrical Output: 0 to 10 V
Materials, Wetted: 316L Stainless Steel
Supply Power Note: 15 to 30 Vdc @ 10 mA
Zero/Balance Error: ± 0.5%
Additional Features 1: ± 0.05% Static Accuracy
Electrical Connection: M12 4 pin Female
Insulation Resistance: 100 MΩ @ 50 Vdc
Electrical Output Note: None
Process Connection Size: 1/4 in
Process Connection Type: NPT Male
Zero/Balance Error Note: ± 0.5% FS typical 1% maximum (1% typical, 2% maximum for 2.5 psi and below)
Operating Temperature, Max: 115 °C
Operating Temperature, Min: -45 °C
Compensated Temperature, Max: 85 °C
Compensated Temperature, Min: -29 °C
Span Setting Adjustable Range: ± 0.5% FS typical 1% maximum (1% typical, 2% maximum for 2.5 psi and below). Calibrated in vertical direction with fitting down
Thermal Effect on Span error, Max: ± 0.5% span
Thermal Effect on Zero error, Max: ± 0.5% span, ± 0.5% span
