ຮັບສ່ວນຫຼຸດພິເສດຕາມປະລິມານ, ອັບເດດລາຄາຂາຍສົ່ງ ແລະ ການແຈ້ງເຕືອນສິນຄ້າໃໝ່ສົ່ງກົງເຖິງອິນບັອກຂອງທ່ານ.
ໂດຍການສະໝັກສະມາຊິກ, ທ່ານຍອມຮັບ ເງື່ອນໄຂການໃຫ້ບໍລິການ ແລະ ນະໂຍບາຍຄວາມເປັນສ່ວນຕົວ ຂອງພວກເຮົາ.
ເຂົ້າເຖິງຜູ້ຊ່ຽວຊານທີ່ໄດ້ຮັບການຢັ້ງຢືນຂອງພວກເຮົາໂດຍກົງ
Accuracy: Class A
Wire Gauge: 26 AWG
Cable Length: 1 m
Current, Max: 0.5 mA
Accuracy Note: Class A (± 0.15+.002*
Lead Material: Nickle Plated Copper
Sensor Length: 0.5 in
Number of Wires: 2
Sensing Element: Class “A” DIN Platinum Element
Sensor Diameter: 0.098 in
Housing Material: Polyimide
Current, Max Note: Higher measurement currents can be applied as long as self heating does not change the measurement value more than the needed measurement accuracy. But should not exceed 2mA for 1002 and 0.5mA for 10002.
Nominal Resistance: 1000 Ω
Long Term Stability: <0.04% after 1000hr
Recommended Current: 0.3 mA
Self Heating Effect: Water [v=0ms], E = 15 mW/K
Response Time, Water: 0.6 sec
Electrical Connection: Stripped Leads
Insulation Resistance: >50 MΩ @ 50 Vdc
Temperature Sensor Type: RTD
Process Temperature, Max: 350 °C
Process Temperature, Min: -200 °C
Insulation Resistance Note: Greater than 50 Megohms at 50 Vdc. at 25°C (77°F)
