Shock: 50 g, 11 ms half sine, vertical and horizontal axis
Weight: 200 g
Accuracy: ± 0.08 %
Bandwidth: DC to 1 kHz
Stability: ± 0.1%
Vibration: 5-2000-5 Hz, 30 minute cycle, Curve L, Mil-Spec 810 figure 514-2-2, vertical and horizontal axis
Cable Length: 2 m
Output Signal: Voltage
Pressure Type: Differential
Pressure, Max: 1 psi
Pressure, Min: 0 psi
Response Time: <1 ms
ADC Resolution: None
Burst Pressure: 1000 psi Maximum
Proof Pressure: 6x Full Scale up to 1000 psi
Stability Note: Long Term Stability (1-Year): ± 0.1% FS typical.
Supply Voltage: 15 to 30 Vdc
Pressure Cycles: 1 million, minimum
Electrical Output: 0 to 10 V
Enclosure Ratings: IP67
Materials, Wetted: 316L Stainless Steel
Supply Power Note: 15 to 30 Vdc @ 10 mA
Media Compatibility: Air, Alkaline solutions, Any, Argon, Carbon dioxide, Dilute Acids, Gases, Helium, Hydraulic Oil, Hydrogen, Light Oil, Liquids, Nitrogen, Non-corrosive Dry Gasses, Oil, Oxygen, Solvents, Steam, Water, Water-based fluids
Proof Pressure Note: Positive Side
Line/Static Pressure: 500 psi max applied to both sides simultaneously
Electrical Connection: Cable
Insulation Resistance: 100 MΩ @ 50 Vdc
Process Connection Size: 1/4 in
Process Connection Type: NPT Female
Operating Temperature, Max: 121 °C
Operating Temperature, Min: -45 °C
Compensated Temperature, Max: 60 °C
Compensated Temperature, Min: 4 °C
Thermal Effect on Zero error, Max: ± 1% FS
Positive Side differential wetted materials: 316L stainless steel
Negative Side differentional compatable fluids or gasses: Same as positive side