ຮັບສ່ວນຫຼຸດພິເສດຕາມປະລິມານ, ອັບເດດລາຄາຂາຍສົ່ງ ແລະ ການແຈ້ງເຕືອນສິນຄ້າໃໝ່ສົ່ງກົງເຖິງອິນບັອກຂອງທ່ານ.
ໂດຍການສະໝັກສະມາຊິກ, ທ່ານຍອມຮັບ ເງື່ອນໄຂການໃຫ້ບໍລິການ ແລະ ນະໂຍບາຍຄວາມເປັນສ່ວນຕົວ ຂອງພວກເຮົາ.
ເຂົ້າເຖິງຜູ້ຊ່ຽວຊານທີ່ໄດ້ຮັບການຢັ້ງຢືນຂອງພວກເຮົາໂດຍກົງ
Width: 96 mm
Height: 48 mm
Length: 165 mm
Weight: 574 g
Accuracy: ± 0.005 %
Polarity: Unipolar/Bipolar, programmable
Setpoint: 4 isolated open collector; rated 150 mA at 1V sink, 30V open
Input Type: Current, Voltage
Resolution: 15-bit
Form factor: 1/8 DIN
Display Size: 13.7 mm (0.54 in)
Display Type: 6 Digit Single LED
Reading Rate: 3/s or 13/s, 60 Hz; 3/s or 12/s, 50 Hz
Display Color: Red, Green
Output Detail: Dual 7 A relays and dual 1 A relays; Form “C”, 7 A @ 30 Vdc or 230 Vac; Isolated, tri-state, TTL/CMOS compatible; external 5V supply required for isolated; internal 5V supply for non-isolated
Sampling Rate: 13 Hz (13 updates/second)
Step Response: 1 sec to 99.9%
A/D Conversion: Dual-slope technique
Control Output: 4 SPST Relay
Data Interface: RS232
Supply Voltage: 115 to 230 Vac
Input Type Note: Analog Current/Voltage
Span Adjustment: 0.00001 to 500,000 counts, programmable
Number of Inputs: 1
Cutout Dimensions: 45 x 92 mm
Display Type Note: Red or green 6-digit, 14-segment, 13.7 mm (0.54") high; 4 alarm indicators
Enclosure Ratings: IP65, NEMA Type 4
Offset Adjustment: 0 to 999,999 or 0 to -99,999, programmable
Power Consumption: 10 W
Relative Humidity: 95% RH, non-condensing
Supply Power Note: 115 or 230 Vac, 49 to 400 Hz; 10 to 32 Vdc
Supply Power Type: AC
Common Mode Voltage: 1500 Vp per HV test
Data Interface Note: 300/600/1200/2400/4800/9600/ 19.2K baud; RJ11 4-wire connection; programmable to transmit current display, alarm status, min/max, actual measured input value and status
Input Configuration: Single-ended
Thermal Span Effect: ±20 ppm
Common Mode Rejection: 120 dB
Normal Mode Rejection: 60 dB
Output Configurations: Analog Current/Voltage
Power Consumption Note: 6 W nom., 10 W max
Sensor Break Protection: Up-scale or down-scale, programmable
Sensor/Transmitter Power: 10 V at 30 mA; 24V at 25 mA
Storage Temperature, Max: 85 °C
Storage Temperature, Min: -40 °C
Current Measurement Range: 0 to 20 mA, 4 to 20 mA
Voltage Measurement Range: 51 to 100 mV, 0 to 1V, 0 to 5V, 1 to 5V, 0 to 10V, 0 to 100V, ±50 mV, ±500 mV, ±5V, ±50V
Warm-Up to Rated Accuracy: 50 min
Operating Temperature, Max: 50 °C
Operating Temperature, Min: 0 °C
Output Configurations Note: 0 to 5V/1 to 5V/ 0 to 10V/0 to 20 mA/4 to 20 mA, user selectable; 354 Vp isolation; 15-bit resolution; 0.1% accuracy; 50 ms step response
