OMEGA D5321 ໂມດູນອິນເທີເຟດ OMEGABUS® 4-Channel Analog In to Digital Out (Thermocouple, Thermocouple Type K, RS232C)
CMRR: 100 dB at 50/60 Hz
Width: 2.794 mm
Height: 6.223 mm
Length: 9.144 mm
Memory: EEPROM
Accuracy: ±1.0°C
Mounting: Spacing for mounting screws = 2.700" (6.858 cm).Screw threads = 6 X 32
Baud Rate: 300 to 115200
Materials: ABS
Input Type: Thermocouple
Protection: Input Protection: 250 Vac
Resolution: ±1.0°C
Calibration: Autozero, no adjustment pots
Sensor Type: Thermocouple Type K
Sampling Rate: 1 Hz (1 update/second)
Data Interface: RS232C
Supply Voltage: 10 to 30 Vdc, 0.75 W
Analog I/O Note: THERMOCOUPLE INPUTS Thermocouple Types: J Ranges: J = -200 to 760°C Resolution: ±1° Overall Accuracy (Error from all sources) from 0 to 40°C Ambient: ±1.0°C Typical Input Impedance: 100 MΩ minimum Lead Resistance Effect: <20µV per 350Ω Open thermocouple and overrange indication Input Burnout: Protection to 250 Vac User Selectable: °C or °F
Conversion Rate: 8 conversions/sec
Impedance Input: 100 MΩ
Leakage Current: < 2 μA
Relative Humidity: 0 to 95% RH non-condensing
Supply Power Type: DC
Common Mode Voltage: Input to Output at 60 Hz: 500 V rms
Data Interface Note: Data Format: NRZ asynchronous; 1 start bit, 7 data bits, 1 parity bit and 1 stop bit Parity: Odd, even, none Address: User selectable address Protocol: ASCII format Multidrop Modules:Up to 30 per host serial port Communications: Distance up to 1219 m (4000') (RS-485) Transient Suppression: On RS-485 communication lines Communications Error:Checking via checksum
Electrical Connection: Screw Terminal
Lead resistance effect: Thermocouple: <20µ V/350Ω
Storage Temperature, Max: 85 °C
Storage Temperature, Min: -25 °C
Current Measurement Range: N/A
Number of Channels, Input: Analog: 4
Voltage Measurement Range: N/A
Operating Temperature, Max: 70 °C
Operating Temperature, Min: -25 °C
Temperature Measurement Range: Type K TC: -150 to 1250°C
ຮັບສ່ວນຫຼຸດພິເສດຕາມປະລິມານ, ອັບເດດລາຄາຂາຍສົ່ງ ແລະ ການແຈ້ງເຕືອນສິນຄ້າໃໝ່ສົ່ງກົງເຖິງອິນບັອກຂອງທ່ານ.
ໂດຍການສະໝັກສະມາຊິກ, ທ່ານຍອມຮັບ ເງື່ອນໄຂການໃຫ້ບໍລິການ ແລະ ນະໂຍບາຍຄວາມເປັນສ່ວນຕົວ ຂອງພວກເຮົາ.
ເຂົ້າເຖິງຜູ້ຊ່ຽວຊານທີ່ໄດ້ຮັບການຢັ້ງຢືນຂອງພວກເຮົາໂດຍກົງ