ຮັບສ່ວນຫຼຸດພິເສດຕາມປະລິມານ, ອັບເດດລາຄາຂາຍສົ່ງ ແລະ ການແຈ້ງເຕືອນສິນຄ້າໃໝ່ສົ່ງກົງເຖິງອິນບັອກຂອງທ່ານ.
ໂດຍການສະໝັກສະມາຊິກ, ທ່ານຍອມຮັບ ເງື່ອນໄຂການໃຫ້ບໍລິການ ແລະ ນະໂຍບາຍຄວາມເປັນສ່ວນຕົວ ຂອງພວກເຮົາ.
ເຂົ້າເຖິງຜູ້ຊ່ຽວຊານທີ່ໄດ້ຮັບການຢັ້ງຢືນຂອງພວກເຮົາໂດຍກົງ
APP: NFC Programming via APP Direct Link for Android smartphones
Width: 48 mm
Height: 48 mm
Length: 105 mm
Tuning: Autotune, Manual
Weight: 185 g
Accuracy: ± 15 %
Input Type: Thermocouple, RTD, Thermistor, mA, mV, Digital I/O, Current Transformer
Soft-Start: Rising gradient expressed as Degrees / Hour or fixed output percentage
Alarm modes: Absolute or Threshold, Adjustable, Band, High, High/Low, Loop Break Alarm, Low, Manual reset
Form factor: 1/16 DIN
Display Type: 4 Digit LED
Double P.I.D: Heating / Cooling P.I.D
Output Detail: 3 Relays, 2 SSRs, 2 Analog;2/3 Relays Outputs : Relay 2 A - 250 V AC resistive change 2 SSR Outputs : 12 / 24 V DC - 30 mA max 1/2 Analog : Selection 4 to 20 mA (40000 points ± 0,2% F.S.) or 0 to 10 VDC (40000 points ± 0,2% F.S.) for command or retransmission PV / SPV
Output Signal: Current, Voltage
Sampling Rate: 470 Hz (470 updates/second)
Control Output: 2 SSR Relay, SPDT Relay, 2 SPST Relay, 2 Analogue Output
Data Interface: RS485 Modbus
Supply Voltage: 24 Vac/Vdc
Data protection: Access by password, Alarm setpoint, Lock of control
Measurement Type: Current, Resistance, Temperature, Voltage
Number of Inputs: 2
Open/Close logic: Open / Close logic for motorized valves
Display Type Note: 4 digits 0.5” white + 4 digits 0.3” red
Enclosure Ratings: IP20, IP65
Relative Humidity: 35 to 95 RH%
Supply Power Note: 50/60 Hz
Supply Power Type: DC
Control Algorithms: On/Off Control, PID Control
Enclosure Material: Polycarbonate
Galvanic Isolation: 2.5 KV
Sampling Rate Note: Programmable up to 2.1 ms (frequency up to 470 Hz)
Auto/Manual function: Output percentage command also with automatic change in case of sensor failure
Quick Set-up Options: Memory Card, software LABSOFTVIEW, or EASY-UP
Additional Features 1: NFC & 2/4 Digital Inputs, CT Input
Programmable Functions: Pre-programmed cycle
Current Transformer Input: Selection One C.T. 50 mA, 800 μs - 4096 points
Number of Control Outputs: 7
Operating Temperature, Max: 45 °C
Operating Temperature, Min: 0 °C
