ຮັບສ່ວນຫຼຸດພິເສດຕາມປະລິມານ, ອັບເດດລາຄາຂາຍສົ່ງ ແລະ ການແຈ້ງເຕືອນສິນຄ້າໃໝ່ສົ່ງກົງເຖິງອິນບັອກຂອງທ່ານ.
ໂດຍການສະໝັກສະມາຊິກ, ທ່ານຍອມຮັບ ເງື່ອນໄຂການໃຫ້ບໍລິການ ແລະ ນະໂຍບາຍຄວາມເປັນສ່ວນຕົວ ຂອງພວກເຮົາ.
ເຂົ້າເຖິງຜູ້ຊ່ຽວຊານທີ່ໄດ້ຮັບການຢັ້ງຢືນຂອງພວກເຮົາໂດຍກົງ
DISPLAY & BUZZER
- 2,000-count backlit LCD : yes
- Direct display in Volt/m (compatible with standards) : yes
- Buzzer proportional to the level of the Field E : yes
- Indication of the measurement frequency range: yes
- “Low battery” and “Hold” indicators : yes
COMMANDS
- Start/Stop (with automatic stop 30mn) : yes
- Measurement Hold function : yes
- Buzzer Start/Stop : yes
- Selection of measurement range : auto
- Selection of 3 kHz fi lter (<, >, full band) : yes
ANTENNA & REFERENCE
- Removable 62 mm “fi eld” antenna : yes
- + Cable detection function : yes
- Field measurement referenced to the individual : yes
- Field measurement referenced to earth : yes
- + Rod : yes
MEASUREMENT
- “RMS” electric fi eld intensity in V/m : yes
- Sensitivity & Accuracy
+ 2 sensitivity ranges (compatible with standards) : 1.0 to 200.0 V/m ; 100 to 2,000 V/m
+ Accuracy (in “laboratory” conditions) : ± 3% ± 5 D at 50/60 Hz
- Frequency Range
+ Analysis of electrical distribution, 10 Hz to 3 kHz: yes
+ Analysis of equipment connected to the mains : 5 Hz to 3 kHz (3 kHz low-pass fi lter); 3 kHz to 100 kHz (3 kHz high-pass fi lter); 5 Hz to 100 kHz (3 kHz without fi lter)
GENERAL SPECIFICATIONS
- Power : 9 V battery (included) - Battery life 60 - 80 hours - Automatic shutdown (30 min)
- Safety Protection : Reversed (M/F) antenna and earth terminals, Protected reference contact
- Metrology: Metrological monitoring available via the Chauvin Arnoux / AEMC network
- Mechanical specifi cations IP65 protection
- Dimensions: 63.6 x 163 x 40 mm
- Weight: approx. 200g with battery
State at delivery: delivered with an external fi eld and cable detection antenna (HX0100), 5 m earth cable (HX0103), socket tester, hard case 270 x 195 x 65 (HX0109)
Optional compatible accessories for VX 0100:
- Rod P01102084
- Adapter for rod (x2) P01102034
The VX0100 tester checks your exposure to eleectromegnetic pollution in your home or workplace. It is a simple, economical and compact BIOTEST tester equipped with a backlit 2,000-count LCD screen. It indicates the level of the low-frequency electric fields generated by power distribution.
Its external antenna means that it can be used both to measure electomagnetic fields and detect cables (renovation). It can very quickly test the pollution generated by connected equipment.
The tests comply with the current and future standards and directives. This BIOTEST instrument can be used to check electrical installations (new and renovation) and for technical and vocational training.
2 measurement methods are provided for more effective testing:
-representative method: fields measured while taking into account the presence of the individual,
-traditional method: fields reference to earth.
