Memmert SN110plus Steriliser (108L)
- Volume: 108 liters
- Interrior dimensions: width 560 x height 480 x depth 400 mm
- Exterior dimensions: width 745 x height 864 x depth 584 mm
- Stainless steel grids (standard): 2
- Max. number of grids/shelves: 5
- Working temperature range: at least 5 above ambient temperature to 2500C
- Setting accuracy: up to 99.90C; 0.10C, from 1000C; 0.50C
- Two Pt100 sensors DIN class A in a 4-wire circuit for mutual monitoring, taking overfunctions in case of an error
- HeatBALANCE function for application specific adjustment of heat output distribution (balance) between the upper and lower heating groups in an adjustment range between -50 % and +50 %.
- ControlCOCKPIT: TwinDISPLAY. Adaptive multifunctional digital PID-microprocessor controller with 2 high-definition TFT-colour display.
- German, English, French, Spanish, Polish, Czech, Hungarian language settings available on the ControlCOCKPIT
- Digital backwards counter with target time setting, adjustable from 1 minute to 99 days
- Function setpointWAIT: the process time dose not start until the set temperature is reached
- Calibration: three freely selectable temperature values
- Adjustable parameters: temperature (Celsius or Fahrenheit), air flap position, programme time, time zones
- Convection: natural convection
- Fresh air admixture: adjustment of pre-heated fresh air admixture by air flap control in 10% steps
- Programme stored in case of power failure
- AtmoCONTROL software on a USB stick for programming, managing and transferring programmes via Ethernet interface or USB port
- ControlCOCKPIT with USB port for uploading programmes, reading out protocol logs, activating the User-ID function
- Displaying of already logged protocol data on the ControlCOCKPIT (max 10,000 values correspond to approx. 1 week)
- Ethernet interface on the rear of the appliance for reading out the protocol log and for uploading programmes and for online logging
- Temperature control: mechanical temperature limiter TB, protection class 1 according to DIN 12880 to switch off the heating approx. 20°C above nominal temperature, overtemperature monitor TWW, protection class 3.1 or adjustable temperature limiter TWB, protection class 2, selectable on display
- Additionally integrated over- and undertemperature monitor "ASF", automatically following the setpoint value at a preset tolerance range, alarm in case of over- or undertemperature, heating is switched off in case of overtemperature
- PID microprocessor control with integrated auto-diagnostic system
- Alarm: visual and acoustic
- Door: fully insulated stainless steel door with 2-point locking
- Structured stainless steel housing, scratch-resistant, robust and durable; rear of zinc-plated steel
- Internal data logger with a storage capacity of at least 10 years
- 100% AtmoSAFE
- Interface: Ethernet LAN, USB
- Voltage: 230 V, 50/60 Hz
- Electrical load: approx. 2800 W
- Ambient temperature: 5 – 400C
- Humidity: max. 80% rh, non-condensing
Accessories:
+ Works calibration certificate at 1600C (Memmert supply)
+ Stainless steel grid, 2 pcs
+ USB stick with AtmoCONTROL software
+ Manual
ຮັບສ່ວນຫຼຸດພິເສດຕາມປະລິມານ, ອັບເດດລາຄາຂາຍສົ່ງ ແລະ ການແຈ້ງເຕືອນສິນຄ້າໃໝ່ສົ່ງກົງເຖິງອິນບັອກຂອງທ່ານ.
ໂດຍການສະໝັກສະມາຊິກ, ທ່ານຍອມຮັບ ເງື່ອນໄຂການໃຫ້ບໍລິການ ແລະ ນະໂຍບາຍຄວາມເປັນສ່ວນຕົວ ຂອງພວກເຮົາ.
ເຂົ້າເຖິງຜູ້ຊ່ຽວຊານທີ່ໄດ້ຮັບການຢັ້ງຢືນຂອງພວກເຮົາໂດຍກົງ