Memmert SN110 Steriliser (108L)

- Volume: 108 liters

- Interrior dimensions: width 560 x height 480 x depth 400 mm

- Exterior dimensions: width 745 x height 864 x depth 584 mm

- Stainless steel grids (standard): 2

- Max. number of grids/shelves: 5

- Working temperature range: at least 5 above ambient temperature to 2500C

- Setting accuracy: up to 99.90C; 0.10C, from 1000C; 0.50C

- German, English, French, Spanish, Polish, Czech, Hungarian language settings available on the ControlCOCKPIT

- ControlCOCKPIT: SingleDISPLAY. Adaptive multifunctional digital PID-microprocessor controller with high-definition TFT-colour display

- Digital backwards counter with target time setting, adjustable from 1 minute to 99 days

- Function setpointWAIT: the process time dose not start until the set temperature is reached

- Calibration: three freely selectable temperature values

- Adjustable parameters: temperature (Celsius or Fahrenheit), air flap position, programme time, time zones

- Convection: natural convection

- Fresh air admixture: adjustment of pre-heated fresh air admixture by air flap control in 10% steps

- Programme stored in case of power failure

- Temperature control: adjustable electronic overtemperature monitor and mechanical temperature limiter TB, protection class 1 according to DIN 12880 to switch off the heating approx. 20°C above nominal temperature

- Autodiagnostic system: for fault analysis

- Interface: Ethernet

- Door: fully insulated stainless steel door with 2-point locking

- Structured stainless steel housing, scratch-resistant, robust and durable; rear of zinc-plated steel

- Internal data logger with a storage capacity of at least 10 years

- 100% AtmoSAFE

- Voltage: 230 V, 50/60 Hz

- Electrical load: approx. 2800 W

- Ambient temperature: 5 – 400C

- Humidity: max. 80% rh, non-condensing

Accessories:

+ Works calibration certificate at 1600C (Memmert supply)

+ Stainless steel grid, 2 pcs

+ Manual

Datasheet