ຮັບສ່ວນຫຼຸດພິເສດຕາມປະລິມານ, ອັບເດດລາຄາຂາຍສົ່ງ ແລະ ການແຈ້ງເຕືອນສິນຄ້າໃໝ່ສົ່ງກົງເຖິງອິນບັອກຂອງທ່ານ.
ໂດຍການສະໝັກສະມາຊິກ, ທ່ານຍອມຮັບ ເງື່ອນໄຂການໃຫ້ບໍລິການ ແລະ ນະໂຍບາຍຄວາມເປັນສ່ວນຕົວ ຂອງພວກເຮົາ.
ເຂົ້າເຖິງຜູ້ຊ່ຽວຊານທີ່ໄດ້ຮັບການຢັ້ງຢືນຂອງພວກເຮົາໂດຍກົງ
- Volume: 384 liters
- Interior dimension: 640W x 1200H x 500D mm
- Exterior dimension: 824W x 1720H x 756D mm
- Stainless steel grids: 2
- Max. number of grids: 14
- Working temperature range without humidity: 0 (at least 20 below ambient temperature) to 700C
- Working temperature range with humidity: +5 (at least 20 below ambient temperature) to 700C
- Setting temperature range without humidity: 0 – 700C
- Setting temperature range with humidity: 5 – 700C
- Setting accuracy: 0.1°C
- 2 Pt100 sensors DIN Class A in 4-wire-circuit for mutual monitoring, taking over functions in case of an error
- Setting range humidity: 10 – 90% rh
- Humidity supply with distilled water from external tank by self-priming pump
- Humidification by hot steam generator
- Dehumidification by cold trap using the Peltier technology
- Setting accuracy: 0.5% rh
- ControlCOCKPIT: TwinDISPLAY. Adaptive multifunctional digital PID-microprocessor controller with 2 high-definition TFT-colour displays
- Language settings: German, English, Spanish, French, Polish, Czech, Hungarian
- Adjustable parameters: temperature (Celsius or Fahrenheit), relative humidity, programme time, time zones
- Timer: Digital backwards counter with target time setting, adjustable from 1 minute to 99 days
- Function HeatBALANCE: adapting the distribution of the heating performance of the upper and lower heating circuit from -50 % to +50 %
- Function SetpointWAIT: the process time does not start until the set temperature is reached.
- Calibration: three freely selectable values each, temperature and humidity
- Interface: Ethernet LAN, USB
- Programme stored in case of power failure
- Programming: AtmoCONTROL software on a USB stick for programming, managing and transferring programmes via Ethernet interface or USB port
- ControlCOCKPIT with USB port for uploading programmes, reading out protocol logs, activating the User-ID function
- Displaying of already logged protocol data on the ControlCOCKPIT (max 10000 values correspond to approx. 1 week)
- Temperature control: over- and undertemperature monitor TWW, protection class 3.3 or adjustable temperature limiter TWB, protection class 2, selectable on display
- Additionally integrated over and undertemperature protection "ASF", automatically following the setpoint value at a preset tolerance range, alarm in case of over or undertemperature, heating function is switched off in case of overtemperature, cooling function in case of undertemperature
- Integral fault diagnostics for temperature and humidity control
- Alarm: visual and acoustic
- Energy-saving Peltier heating-/cooling system integrated in the rear
- Structured stainless steel housing, scratch-resistant, robust and durable; rear of zinc-plated steel
- Door: fully insulated stainless steel door with 2-point locking, inner glass door
- Internal data logger with a storage capacity of least 10 years
- Voltage: 230 V, 50/60 Hz
- Electrical load: approx. 1200 W.
- Ambient temperature: 16 – 400C
- Humidity: max. 70% rh, non-condensing
- Installation: 4 feet; mounted on lockable castors
Accessories:
+ Calibration certificate standard values 100C and 370C, 60% rh at 300C (Memmert supply)
+ Stainless steel grids, 2 pcs
+ Water tank including connection hose
+ Manual
