For full functionality of this site it is necessary to enable JavaScript.
EMIN.COM.LA
0
Product image

iKAM iK-3HTB4568 ເຄື່ອງທົດສອບຄວາມຕ້ານທານພາຍໃນຂອງແບັດເຕີຣີ (0.00001V~2000.000V)

ຕິດຕໍ່
ການຊຳລະເງິນທີ່ປອດໄພ
ການຮັບປະກັນຄຸນນະພາບ
ປ່ຽນ ແລະ ສົ່ງຄືນງ່າຍ
ມີບໍລິການຈັດສົ່ງ

Voltage range: 0.00001V~2000.000V

Voltage accuracy: 0.0005

Resistance Range: 0.0001mΩ~3.3000kΩ

Resistance Accuracy: 0.005

Communication interface: USB/232/485

Communication protocol: SCPI/MODBUS

ALARM IN: standard configuration

Test parameters: AC resistance, DC voltage

Display function: 4.3-inch touch LCD screen display, full touch operation

Basic accuracy: Resistance accuracy of 0.5%, voltage accuracy of 0.02% below 120V including 120V, 0.05% above 120V

Measurement range: Resistance test range: 0.0001mΩ~33000kΩ Voltage test range: 0.00001V~3000V

Signal source: 1kHz, frequency stability: 20ppm

Range: testing is used for measuring ranges of 3mΩ~3kΩ. The range is automatic, manual, and nominal. Range nominal: The instrument will automatically select the range based on the nominal value

Test speed:

+ The instrument has four speeds: slow, medium, fast, and high

+ Full channel open and manual range mode

+ Slow speed: 4 times/second Medium speed: 8 times/second

+ Fast: 20 times/second High speed: 55 times/second

Correct: short circuit reset within the full range

Comparator:

+ The instrument has sorting function

+ RHI/RNG/RLO outputs. VHI/VNG/VLO output. Total NG/OK output

+ Comparison method: Absolute value tolerance ±TOL

+ Sorting: Compare the absolute deviation between the measured value and the nominal value with the limits of each level

+ Percentage tolerance %TOL

+ Sorting: Compare the percentage deviation between the measured value and the nominal value with the limits of each level

+ Sequential comparison sorting: direct comparison of measured values with upper and lower limits

Trigger: internal trigger, manual trigger, external trigger, and remote trigger

Wire breakage detection function: wire breakage detection and open circuit detection

Interface: Handler interface RS-232/RS-485 interface USB interface

Power requirements: 85V-265VAC, 50/60Hz, power: 20VA

Attachment: Battery Internal Resistance Test Cable, RS232 Communication Cable

ຕິດຕາມຂ່າວສານ ແລະ ຂໍ້ສະເໜີ

ຮັບສ່ວນຫຼຸດພິເສດຕາມປະລິມານ, ອັບເດດລາຄາຂາຍສົ່ງ ແລະ ການແຈ້ງເຕືອນສິນຄ້າໃໝ່ສົ່ງກົງເຖິງອິນບັອກຂອງທ່ານ.

ໂດຍການສະໝັກສະມາຊິກ, ທ່ານຍອມຮັບ ເງື່ອນໄຂການໃຫ້ບໍລິການ ແລະ ນະໂຍບາຍຄວາມເປັນສ່ວນຕົວ ຂອງພວກເຮົາ.

ການຊ່ວຍເຫຼືໍາດ່ວນ

ເຂົ້າເຖິງຜູ້ຊ່ຽວຊານທີ່ໄດ້ຮັບການຢັ້ງຢືນຂອງພວກເຮົາໂດຍກົງ