ຮັບສ່ວນຫຼຸດພິເສດຕາມປະລິມານ, ອັບເດດລາຄາຂາຍສົ່ງ ແລະ ການແຈ້ງເຕືອນສິນຄ້າໃໝ່ສົ່ງກົງເຖິງອິນບັອກຂອງທ່ານ.
ໂດຍການສະໝັກສະມາຊິກ, ທ່ານຍອມຮັບ ເງື່ອນໄຂການໃຫ້ບໍລິການ ແລະ ນະໂຍບາຍຄວາມເປັນສ່ວນຕົວ ຂອງພວກເຮົາ.
ເຂົ້າເຖິງຜູ້ຊ່ຽວຊານທີ່ໄດ້ຮັບການຢັ້ງຢືນຂອງພວກເຮົາໂດຍກົງ
Barrel parameters: Inner hole 9.55±0.025mm
Pistons parameters: Piston head: 9.475±0.015mm
Piston length: H=6.35±0.1mm
Paramters: Extrusion hole 1=2.095±0.005mm
Temperature accuracy: ±0.2 degree centigrade
Display resolution: 0.1degree centigrade
Maximum comsuption: < 600W
Temperature accuracy: 4 min.
Weight parameters are as follows:
Weight accuracy: ±0.5%
Basic configuration: A 0.325kg, B 1.2kg, C 2.16kg, D 3.8kg, E 5kg, F 10kg, G 12.5kg, H 21.6kg
Position detection
Loop distance from up and down: 30mm
Control precision: ± 0.1mm
Test flow control
Times of cutting the material: 0~10 times
Material cutting interval: 0~999s(set reference Table 2)
Control flow reaches the set temperature without volatility
Barrel temperature time: 15 min.
Material be installed: 1 min.
Material sample temperature recovery time: 4 min.
When binder set: 1min
