LIB TK5-1000-B ຫ້ອງວົງຈອນຄວາມຮ້ອນອັດຕາການປ່ຽນແປງໄວ (-40℃ ～ +150 ℃; 100L)

Internal Dimension (mm): 400*500*500

Overall Dimension (mm): 900*1050*1620

Interior Volume: 100L

Heat load: 1000W

Temperature Range: -40℃ ～ +150 ℃

Temperature Fluctuation: ± 0.5 ℃

Temperature Deviation: ± 2.0 ℃

Cooling Rate: 5 ℃ / min (15 ℃ / min)

Heating Rate: 5 ℃ / min (15 ℃ / min)

Cooling system: Mechanical compression refrigeration system

Controller: Programmable color LCD touch screen controller, Ethernet connection

Safety Device: Over-temperature Protection; Over-current Protection; Refrigerant High-Pressure Protection; Earth leakage Protection

Exterior Material: Steel Plate with protective coating

Interior Material: SUS304 stainless steel

Observation Window: Interior lighting, double-layer thermo stability silicone rubber sealing

Standard Configuration: 1 Cable hole with plug; 2 shelves

Advantages

1. High-Speed Thermal Cycling for ESS Testing: The chamber is engineered specifically for rapid temperature change applications, supporting controlled ramp rates of 5 / 10 / 15 °C/min (customizable up to 20 °C/min). This capability enables efficient ESS testing, allowing manufacturers to identify latent defects in a much shorter time compared with conventional chambers.

2. Wide Temperature Range for Extreme Conditions: Operating from –40 °C to +170 °C, with optional low-temperature configurations down to –70 °C or –86 °C, the chamber accurately simulates extreme cold and high-temperature environments. It is well suited for batteries, automotive electronics, and aerospace components exposed to severe thermal stress.

3. Stable Control and Excellent Temperature Uniformity: Advanced airflow management and PID temperature control maintain fluctuation within ±0.5 °C and chamber uniformity within ±2 °C, even during fast ramping. This ensures all test samples experience consistent thermal conditions, improving repeatability and confidence in test data.

4. High Efficiency and Flexible Test Programming: The programmable touchscreen controller supports multi-step thermal cycling profiles and long-duration automated operation. Faster ramp rates significantly increase test throughput, helping laboratories shorten validation cycles and improve overall testing efficiency.

5. Robust Safety Design and Long-Term Reliability: The chamber features a SUS304 stainless-steel interior and reinforced steel exterior for continuous industrial use. Comprehensive safety protections—including over-temperature shutdown, electrical protection, and optional explosion-proof configurations—ensure safe operation when testing high-energy components such as lithium batteries.