Leaptronix LP-ARM9-2410-SYSTEM ARM Chip System Design & Experiment Platform | EMIN.COM.LA

Leaptronix LP-ARM9-2410-SYSTEM ARM Chip System Design & Experiment Platform

Name: Leaptronix LP-ARM9-2410-SYSTEM ARM Chip System Design & Experiment Platform
Brand: LEAPTRONIX

ຜູ້ຜະລິດLEAPTRONIX(ເບິ່ງສິນຄ້າອື່ນໆຂອງຍີ່ຫໍ້ນີ້)

ModelLP-ARM9-2410-SYSTEM

ຕິດຕໍ່

ຈຳນວນ

ການຊຳລະເງິນທີ່ປອດໄພ

ການຮັບປະກັນຄຸນນະພາບ

ປ່ຽນ ແລະ ສົ່ງຄືນງ່າຍ

ມີບໍລິການຈັດສົ່ງ

Manufacturer: Leaptronix

Model: LP-ARM9-2410-SYSTEM

Datasheet

ARM Chip System Design & Experiment Platform

Bring You into System & Embedded World

Introduction

Samsung S3C2410 is maturest in the ARM9 chip family, e.g. technical documents, referring books, supported systems, peripheral devices... and so rich and diversification. It can be said that it the best choice for learning ARM SYTEM. The LP-ARM9-2410-SYTEM provides simple design which allow you to quickly access SOC world, as well as laid good basis of the ability and practical experience for the embedded design.

Moreover, the LP-ARM9-2410-SYTEM compact structure with 3.5 inch touchscreen LCD, 10/100M Ethernet, USB, 250,000 logic gate FPGA and integrity of peripheral interface allow you to easily understand SYTEM and Embedded. And you can use this platform for project development and products systematic.

Features

Support Samsung S3C24C10 x 32-bits RISC Microprocessor which is under SARM920T frame.
Use Xilinx Spartan-3E FPGA XC3S250E PQFP208 which contains 250,000 logic gate counts. Let you process ARM+FPGA experiments or topic research.
Modular design, able to change other CUP boards for learning.
Provide BootLoader function, able to use C or Assembly for writing Language, via the cable to download to the LP-2900 platform for experiment and verification.
Able to connect to PC via RS-232 interface. Use the simple terminal program for control and process program download and execute.
Provide JTAG interface, when writing the program, able to use ADS or RealView for single step trace and debug.
Provide logic analyzer interface, able to view the SPI, I2C, UART and PWM waveform for analysis. If you use Leaptronix LA or PLA, you can view the protocol decoder as well.
If you already have LP-2900, you just purchase LP-ARM9-2410 module for upgrade to ARM9 training kit.

Specifications

CPU：SAMUNG S3C24C10x
Memory:
- SDRAM FLASH 4MBytes
- NOR FLASH 4MBtyes
- NAND FLASH 64MBytes
Display：3.5 inch TFT LCD, 320 X 240 pixels
Touch interface：4 line resistance type
Net interface：10 / 100M Ethernet
Communication interface：RS-232
Sound interface：
- IIS sound interface chip, Stereo audio output interface
- Microphone input interface
JTAG interface：ARM standard JTAG interface
FPGA：XILINX XC3S250E PQFP208
Button：5 button key
Power：100V AC~240V AC (Auto-Switching), 50/60Hz
Dimension：32cm x 22.6cm x 3.0 / 8.56cm
Weight：500g
Operation altitude：up to 5000m
Operation humidity：20% ~ 70%(non-condensing)
Operation Temperature：+5˚C ~ +45˚C

Recommended Bundling Instruments

Leaptronix LA-2025 / LA-2050 / PLA-1016 / PLA-2532

ສິນຄ້າທີ່ກ່ຽວຂ້ອງ

ເບິ່ງເພີ່ມເຕີມ

Leaptronix LP-PCI-LAB Development System

ຕິດຕໍ່

Analog Devices ADZS-A2B-ANALYZER Thiết bị phân tích Bus A2B

ຕິດຕໍ່

LEAPTRONIX 3-in-1 Module Kit ໂມດູນການຂະຫຍາຍສໍາລັບມໍເຕີ, ພັດລົມແລະເຊັນເຊີ

ຕິດຕໍ່