Labstac WU514 Synthesizing Ultrapure Water System
Water Inlet: Tap water: TDS<200 ppm (Extra pretreatment filter is recommended if TDS>200 ppm)
Temperature: 5-45°C
Pressure: 1.0-4.0 Kgf/cm²
Bacteria: <0.1 cfu/ml
Output(25°C)****: 10 L/hrs
Pure water outlet: 2:Electro Deionization water, ultrapure water
DimensionLxWxH: 500×360×540 mm
Weight: 30 kg
Standard configuration: Main body (Including 1 set of cartridges) + 20 liters tank+accessory bag
Power Consumption (W): 120 W
Power Supply: AC110-220 V, 50/60 Hz
Note: *The feed water quality will influence the pure water´s quality and cartridges´ life-span.
**PF:polypropylene spun fiber, KDF:kinetic degradation fluxion, AC:active carbon, RO:reverse osmosis,
SF:softener, EDI: electro deionization, UV:ultraviolet, DI:ion exchange, UF:ultrafiltration, TF:terminal microfiltration.
***Value of number will be influenced by temperature and feed water quality.
****All the specifications are tested under the situation:feed water´s TDS=200ppm, 25°C, 50psi and 15% recovery rate.
Heavy Metal Ion: <0.1 ppb
TOC***: <30 ppb
Resistivity (25°C): 18.2 MΩ.cm
Particle (>0.1µm): <1/ml
Flow procedure**: PF+KDF+AC+RO+SF+EDI+UV+DI+UF+TF
Resistivity***: >5 MΩ.cm
Silicon rejection rate: >99.9%
Endotoxin: <0.001 EU/ml
RNases: <0.01 ng/ml
DNases: <4 pg/µl
ຮັບສ່ວນຫຼຸດພິເສດຕາມປະລິມານ, ອັບເດດລາຄາຂາຍສົ່ງ ແລະ ການແຈ້ງເຕືອນສິນຄ້າໃໝ່ສົ່ງກົງເຖິງອິນບັອກຂອງທ່ານ.
ໂດຍການສະໝັກສະມາຊິກ, ທ່ານຍອມຮັບ ເງື່ອນໄຂການໃຫ້ບໍລິການ ແລະ ນະໂຍບາຍຄວາມເປັນສ່ວນຕົວ ຂອງພວກເຮົາ.
ເຂົ້າເຖິງຜູ້ຊ່ຽວຊານທີ່ໄດ້ຮັບການຢັ້ງຢືນຂອງພວກເຮົາໂດຍກົງ