Labstac IO132 Air Jacketed CO2 Incubator (151 L)

Capacity: 151 L

Temperature Range: 5°C above ambient temperature to 50°C

Temperature Stability: ±0.1°C

Temperature Uniformity: ±0.2°C

CO2 Range: 0-20%

CO2 Stability: ±0.1%

CO2 Sensor: Thermal Conductivity

CO2 Inlet Pressure: 0.1 Mpa

Filter: 0.3 um, Efficiency:99.998% (for CO2)

Access Port: Standard

Remote alarm contacts: Standard

Relative Humidity: ≥ 95%

Humidifying System: Special designed water reservoir

Water reservoir volume: 3 L

Inner Door: 3 inner door standard

Interior: Type 304, mirror finish, stainless steel

Exterior: Electrolyzed galvanization steel, powder coated

Temperature Sensors: PT1000

Internal Dimention (WxDxH): 470×530×607 mm

Overall Dimension (WxDxH): 637x762x909 mm

Shelves/Trays: 3 standard, 10 maximum

Shelf Dimension(WxD): 423×445 mm

Temperature control method: Microprocessor

CO2 control system: Microprocessor

Alarm System: Power interruption, High/Low temperature, Deviation of CO2, RH, Door ajar, Independent overheat protection

Weight: 80 kg

Data Output: RS232

De-contamination: 90°C moist heat disinfection

Power: 600 W

Power Supply: AC-220 V/AC 110 V 50/60 Hz

Accessories:

IX1007Standard shelf (3 Sets)

IX1008Electric siphon pump (1 Set)

Optional Accessories:

IX1009Floor stand for 2 stacked incubators (585x637x200 mm)

IX1010Floor stand for 1 incubator (585x637x400 mm)

IX1011Small CO2 inlet filter

IX1012Shelf (Including: shelfx1, shelf supportx2)

IX1013UV light

IX1014Electric siphon pump

IX1015CO2 steel cylinder auto-switch device

IX1016CO2 regulator

IX10174 in 1 CO2 steel cylinder auto-switch device

IX1018Air connector