JINKO JK7142 ທົນທານຕໍ່ແຮງດັນ insulation Tester (5KV AC / 20mA, 6KV DC / 7.5mA)

AC Withstand Voltage Test: Rated Output: 5KV AC / 20mA

DC Withstand Voltage Test: Rated Output: 6KV DC / 7.5mA

Even the Wave: <5%D 6KV DC / 5mA Resistance Under Load

Voltage Regulation: ±(1% Setting + 5V) No Load to Full Load

Arc Detection: 0-9 Sections: 0 = OFF

PLC Remote Control:

Input: Test, Reset, Memory 1, 2, 3, Interlock

Output: Pass, Fail, Processing, Reset-Out

Test Failure Alarm: Buzzer

Storage Group: 10 Groups, 3 Steps in Each Group

Safety Lock Keyboard: Can choose to "Lock" or "Not Locked" two modes

LCD: 128 x 64 LCD Screen

Corrected Mode: The Front Panel Software Correction

Input Characteristics: Single Phase 47-63Hz, 115/230Vac ± 15%, Optional, 3.15A Insurance

Work Environment: 0-40℃ / 20-80% RH

Dimension (WHD): 280 x 100 x 380 mm

Datasheet

Manual

Product Description: Large 128*64 Graphic LCD display Single and 7305 grounding impedance tester connected with standard 19 inch instrument.

Characteristics

l Three testing options are available:ACW, DCW, IR

l  Large 128*64 Graphic LCD display

l Single and 7305 grounding impedance tester connected with standard 19 inch instrument.

l Can also carry out 100 online test

l Built in 10 sets of program memory, each group of 3 test steps can be carried out in the process of memory test link test

l Communication speed, baud rate up to 19600

l Fast discharge function, can be measured in 0.2 seconds on the electrical energy to complete, to ensure personnel safety

l Anti high voltage electric shock function, when the human body can be interrupted when the error output

l  Post detection test, determine the test if is normal before the test function

l Front panel software input correction

l  Date and time setting, correction time and the warning time can remind users

l Built in PLC Remote remote control interface

l Botton lock

l Security lock function

l Small size, light weight