JINKO HSP-8008 Programmable Switching DC Power Supply (0~80.5V, 0~8A)

Rated output (0°C ~ 40°C):

Voltage: 0~80.5V

Current: 0~8A

O.V.P: 0.1~88V

O.C.P: 0.1~8.8A

Constant Voltage Operation:

Line regulation: ≤ 0.01% + 4mV

Load regulation: ≤ 0.1% + 5mV

Ripple & Noise: 2mVrms, 30mVpp (20Hz~20MHz)

Recovery time: ≤ 1.5ms (50% load change)

Constant Current Operation:

Line regulation: ≤ 0.1% + 3mA

Load regulation: ≤ 0.1% + 5mA

Ripple & Noise: ≤ 10mArms

Display:

Voltmeter: 5 digits LCD display

Ammeter: 5 digits LCD display

Setting resolution: 1mV/1mA

Reading resolution: 1mV/1mA

Setting accuracy:

Voltage: ±(0.03% of reading + 10mV) (25±5°C)

Current: ±(0.1% of reading + 0.1% of FS) (25±5°C)

Reading accuracy:

Voltage: ±(0.02% of reading + 5mV) (25±5°C)

Current: ±(0.1% of reading + 0.1% of FS) (25±5°C)

General Protection:

Panel lock: Over load, over voltage, over current, over temperature, and reverse polarity protections provided

Remote Sensing Function: 5% of FS

RS-232 interface: Optional USB device interface for PC remote control

Support: SCPI commands, support Labview

Interface: 0-5V analog control interface

USB host interface: For data storage and recall from external USB flash drive

Memory: Optional RS-485 interface: 300 sets internal save, support save to USB flash drive

Insulation:

Between base and terminals: ≥20ΜΩ/500VDC

Between base and AC power cord: ≥30ΜΩ/500VDC

Operating environment:

Storage environment: 0°C~40°C, ≤80%RH

Power source: -10°C~70°C, ≤70%RH

Accessories:

AC220V±10%, 50/60Hz:

Dimension: 215x89x352mm

Power cord x1, Operation manual x1, RS-232 cable x1, Software CD x1

Weight: 4.5kg

Product Introduction 

This is a high accuracy programmable DC power supply with single output. With easy connection to computer via RS-232 interface, this power supply satisfies users’ demand for auto-testing and auto-control.The software commands are fully complied with the SCPI commands, it is convenient for user to proceed auto-tested and auto-controlled application program. Also, the digitalization of system makes a speedy, precise and convenient input of information controlled by keyboard. The adjustment of voltage/current is made by software calibration without manual error that will increase the preciseness of the instrument. 

Features

▪ High accuracy, high resolution 1mV/1mA

▪ 4.3 inches TFT LCD display

▪ Over load, over voltage, over current, over temperature and reverse polarity protections

▪ CV and CC operations, auto CV and CC switch

▪ High speed rotary dial and keypad input

▪ Built-in beeper alarm

▪ Panel lock and output ON/OFF function

▪ 300 sets save & recall for voltage, current and time setups, easy use in auto test

▪ Timing output function and support infinite and specified number of cycles of output

▪ Displays load resistance, with low resistance measurement function

▪ Remote sense function

▪ Smart cooling fan achieving low noise

▪ Battery charge function

▪ USB host interface for data storage and recall from external USB flash driver

▪ RS-232 interface for PC remote control

▪ Supports SCPI commands, support Labview

▪ Analog control interface

▪ RS485 interface (optional)

▪ Compact design, light weight