ຮັບສ່ວນຫຼຸດພິເສດຕາມປະລິມານ, ອັບເດດລາຄາຂາຍສົ່ງ ແລະ ການແຈ້ງເຕືອນສິນຄ້າໃໝ່ສົ່ງກົງເຖິງອິນບັອກຂອງທ່ານ.
ໂດຍການສະໝັກສະມາຊິກ, ທ່ານຍອມຮັບ ເງື່ອນໄຂການໃຫ້ບໍລິການ ແລະ ນະໂຍບາຍຄວາມເປັນສ່ວນຕົວ ຂອງພວກເຮົາ.
ເຂົ້າເຖິງຜູ້ຊ່ຽວຊານທີ່ໄດ້ຮັບການຢັ້ງຢືນຂອງພວກເຮົາໂດຍກົງ
Maximum range: 2000N.m
Rated RPM: 4000rpm
D: 60mm
B: 120mm
L: 258mm
L1: 75.5mm
H: 60mm
H1: 138.5mm
A1: 60mm
A2: 70mm
B1: 75mm
B2: 122.5mm
D1: 93mm
M: 4-M10 depth 15
M1: 8-M10 depth 15
N: 2-Ø8 depth 15
Key size (LxW): double key 60x18
P: 46mm
RPM signal: 120/60/10 pulses/rev.
Zero output: ±0.1%F.S.
Accuracy: 0.1%F.S.
Hysteresis: 0.5%F.S.
Repeatability: 0.1%F.S.
Creep (30 minutes): 0.05%F.S.
Temperature sensitivity drift: 0.05%F.S./10°C
Zero temperature drift: 0.05%F.S./10°C
Response time: 0.6ms (50% response)
Response frequency: 1kHz
Max. torsion angle: 2.6×10rad (0.149°)
Inertial torque: 0.38kg.cm
Intrinsic frequency of rotor vibration: 19.4kHz
Torque constant: 3.85×10N.m/rad
Material: Stainless steel
Annual stability: 0.3%/year
Load resistance: >2ΚΩ
Power supply: DC24V 0.2A
Working environment: -10~50°C ≤85%RH
Safety overload: 150%
Extreme overload: 200%
Cable specification: Ø5mm*3m
Extreme cable pulling force: 10kg
■Real-time display of torque, RPM and power values
■Support RS485 communication, support active uploading protocols
■Communication rate up to 1000 Hz
■Torque signal is ±5V transformed voltage output
■ OLED display, resolution 128*64
■Simple calibration, zeroing, filtering, etc. can be performed
Datasheet
