ຮັບສ່ວນຫຼຸດພິເສດຕາມປະລິມານ, ອັບເດດລາຄາຂາຍສົ່ງ ແລະ ການແຈ້ງເຕືອນສິນຄ້າໃໝ່ສົ່ງກົງເຖິງອິນບັອກຂອງທ່ານ.
ໂດຍການສະໝັກສະມາຊິກ, ທ່ານຍອມຮັບ ເງື່ອນໄຂການໃຫ້ບໍລິການ ແລະ ນະໂຍບາຍຄວາມເປັນສ່ວນຕົວ ຂອງພວກເຮົາ.
ເຂົ້າເຖິງຜູ້ຊ່ຽວຊານທີ່ໄດ້ຮັບການຢັ້ງຢືນຂອງພວກເຮົາໂດຍກົງ
Opening Size & Dimension Requirement: 25 x 25mm
Initial Test Force: 10 kgf
Total Test Force: 60 kgf, 100 kgf, 150 kgf
Test Head:
120°Diamond Indenter
1.588 mm carbide alloy ball
Testing Resolution: 0.5HR
Indication Error: Complying with ISO6508,ASTM E18 standards
Repeatability Error: Complying with ISO6508,ASTM E18 standards
Test Range: HRA, HRB, HRC…HRV etc, 15 scales.
Dimension: 330x260x150mm
Weight/ Weight/ Gross Weight: 0.8 kg/2.8 kg
Application Range: Common metal including iron and steel, Cu, Al, Ni, Ti, Pb, carburized layer and hard alloy, etc.
Standard Delivery:
Instrument Main Body
120° Diamond Indenter
Bench Stand
V Anvil
Carrying Case
Extensions
Warranty Card / Qualified Certificate
Rockwell Hardness Block
1.588 mm Carbide Alloy Ball Indenter
Flat Anvil
Operation Manual
Packing List
Application:
Test thin, small, long and irregular parts
Test standard parts, hardware and cutter etc.
Test inner and outer surface hardness of steel pipe directly.
Very suitable for parts with small bearing face(e.g. small stamping)
Match different anvils, test irregular parts.
Features:
Small and light. Min weight 0.8 kg
Operation as simple as micrometer.
Convenient. Used on table or take off.
Reliable. Designed by Rockwell hardness test method.
As accurate as desk testers. Complying with ISO 6508 and ASTM E18.
Traceable standard block.
Traceable test force.
Certificated indenter by standard Rockwell hardness tester.
