For full functionality of this site it is necessary to enable JavaScript.
EMIN.COM.LA
0
Product image

HINOTEK Bante900P Ph/Ion/Conductivity/ເຄື່ອງວັດແທກອົກຊີເຈນທີ່ລະລາຍ (-2.000 - 20.000pH, ±1999.9mV)

ModelBante900P
ການຮັບປະກັນ1 ປີ
ຕິດຕໍ່
ການຊຳລະເງິນທີ່ປອດໄພ
ການຮັບປະກັນຄຸນນະພາບ
ປ່ຽນ ແລະ ສົ່ງຄືນງ່າຍ
ມີບໍລິການຈັດສົ່ງ

pH:

Range: -2.000 to 20.000pH

Resolution: 0.001, 0.01, 0.1pH, selectable

Accuracy: ±0.002pH

Calibration Points: 1 to 5 points

pH Buffer Options: USA, NIST, DIN, 2 custom buffers

ORP:

Range: ±1999.9mV

Resolution: 0.1, 1mV, selectable

Accuracy: ±0.2mV

Calibration Points: 1 point

Measurement Modes: Relative or absolute mV

Ion Concentration:

Range: 0.001 to 19999 (depending on the range of ISE)

Resolution: 0.001, 0.01, 0.1, 1

Accuracy: ±0.5% F.S. (monovalent), ±1% F.S. (divalent)

Calibration Points: 2 to 5 points

Calibration Solutions: 0.001, 0.01, 0.1, 1, 10, 100, 1000, 10000

Measurement Units: ppm, mg/L, mol/L, mmol/L

Conductivity:

Range: 0.01 to 20.00, 200.0, 2000µS/cm, 20.00, 200.0mS/cm

Resolution: 0.001, 0.01, 0.1, 1

Accuracy: ±0.5% F.S.

Calibration Points: 1 to 5 points

Calibration Solutions: 10µS, 84µS, 1413µS, 12.88mS, 111.8mS

Temperature Coefficient: Linear (0.0 to 10.0%/°C), pure water

Reference Temperature: 20/25°C

Cell Constant: K=0.1, 1, 10 or custom

TDS:

Range: 0.00 to 10.00, 100.0, 1000ppm, 10.00, 200.0ppt

Resolution: 0.01, 0.1, 1

Accuracy: ±1% F.S.

TDS Factor: 0.1 to 1.0 (default 0.5)

Salinity:

Range: 0.00 to 80.00ppt, 0.00 to 42.00psu

Resolution: 0.01

Accuracy: ±1% F.S.

Resistivity:

Range: 0.00 to 20.00MΩ

Resolution: 0.01

Accuracy: ±1% F.S.

Dissolved Oxygen:

DO Range: 0.00 to 20.00mg/L

Resolution: 0.01, 0.1mg/L, selectable

Accuracy: ±0.2mg/L

% Saturation of Oxygen: 0.0 to 200.0%

Resolution: 0.1, 1%, selectable

Accuracy: ±2.0%

Calibration Points: 1 or 2 points

Pressure Correction: 60.0 to 112.5kPa/450 to 850mmHg, manual

Salinity Correction: 0.0 to 50.0g/L, manual

Temperature:

Range: 0 to 105°C/32 to 221°F

Resolution: 0.1°C/0.1°F

Accuracy: ±0.5°C/±0.9°F

Offset Calibration: 1 point

Calibration Range: Reading ±10°C

General Specifications:

Temperature Compensation: 0 to 100°C/32 to 212°F, manual or automatic

Stability Criteria: Low or high

Calibration Due Alarm: 1 to 31 days or off

Auto-Power Off: 10, 20 or 30 minutes after last key pressed

Memory: Stores up to 500 data sets

Output: USB communication interface

Connector: BNC, 6-pin nimi-DIN, 3.5mm jack socket

Display: Custom LCD (80×60mm)

Power: 3×1.5V AA batteries or DC5V power adapter

Battery Life: Approximately 150 hours (turn off the backlight)

Dimensions: 170(L)×85(W)×30(H)mm

Weight: 300g

Datasheet


Manual


ຕິດຕາມຂ່າວສານ ແລະ ຂໍ້ສະເໜີ

ຮັບສ່ວນຫຼຸດພິເສດຕາມປະລິມານ, ອັບເດດລາຄາຂາຍສົ່ງ ແລະ ການແຈ້ງເຕືອນສິນຄ້າໃໝ່ສົ່ງກົງເຖິງອິນບັອກຂອງທ່ານ.

ໂດຍການສະໝັກສະມາຊິກ, ທ່ານຍອມຮັບ ເງື່ອນໄຂການໃຫ້ບໍລິການ ແລະ ນະໂຍບາຍຄວາມເປັນສ່ວນຕົວ ຂອງພວກເຮົາ.

ການຊ່ວຍເຫຼືໍາດ່ວນ

ເຂົ້າເຖິງຜູ້ຊ່ຽວຊານທີ່ໄດ້ຮັບການຢັ້ງຢືນຂອງພວກເຮົາໂດຍກົງ