HILO-test PG 10-7000 ເຄື່ອງຜະລິດກະສົບກະທົບກະລຸນາ (10/350 µs; 2.5 kA)
Main Unit, Control
Microprocessor control, display with LCD module: 8×40 characters
Optically isolated interface for remote control of the generator: built-in
Parallel printer interface for online logging: D-25 pin
External trigger input: 10 V at 1 kΩ
External trigger output: 10 V at 1 kΩ
Connections for external safety circuit: 24 V DC
External red and green warning lamps according to VDE 0104: 230 V, 60 W
Mains connection: 230 V, 50/60 Hz
Construction: 19" cabinet on mobile base, W × H × D approx. 553 × 800 × 1250 mm³
Weight: 240 kg
High Voltage Charger
Charging voltage adjustable: 0.2 – 10 kV ±2%
Charging capacitor: 140 µF
Maximum energy content: 7000 Ws
Charging time, max.: < 60 sec
Maximum repetition rate: 1/80 sec
Pulse-Forming Network
Short-circuit current waveform (IEC 60060-2): 10 / 350 µs ±20%
Peak current adjustable via charging voltage: 50 – 2500 A ±10%
Open-circuit voltage rise time: 1.2 µs ±30%
Polarity of impulse output, switchable: POS / NEG / ALT
High-current output (rear panel sockets): 12 mm Ø
Ground connection for earthing the device: 12 mm screw terminal
Impulse current measuring resistor, built-in: 2 mΩ, 1.0 MHz
ຮັບສ່ວນຫຼຸດພິເສດຕາມປະລິມານ, ອັບເດດລາຄາຂາຍສົ່ງ ແລະ ການແຈ້ງເຕືອນສິນຄ້າໃໝ່ສົ່ງກົງເຖິງອິນບັອກຂອງທ່ານ.
ໂດຍການສະໝັກສະມາຊິກ, ທ່ານຍອມຮັບ ເງື່ອນໄຂການໃຫ້ບໍລິການ ແລະ ນະໂຍບາຍຄວາມເປັນສ່ວນຕົວ ຂອງພວກເຮົາ.
ເຂົ້າເຖິງຜູ້ຊ່ຽວຊານທີ່ໄດ້ຮັບການຢັ້ງຢືນຂອງພວກເຮົາໂດຍກົງ