ຮັບສ່ວນຫຼຸດພິເສດຕາມປະລິມານ, ອັບເດດລາຄາຂາຍສົ່ງ ແລະ ການແຈ້ງເຕືອນສິນຄ້າໃໝ່ສົ່ງກົງເຖິງອິນບັອກຂອງທ່ານ.
ໂດຍການສະໝັກສະມາຊິກ, ທ່ານຍອມຮັບ ເງື່ອນໄຂການໃຫ້ບໍລິການ ແລະ ນະໂຍບາຍຄວາມເປັນສ່ວນຕົວ ຂອງພວກເຮົາ.
ເຂົ້າເຖິງຜູ້ຊ່ຽວຊານທີ່ໄດ້ຮັບການຢັ້ງຢືນຂອງພວກເຮົາໂດຍກົງ
SPECIFICATION
TEST FREQUENCY: DC, 10Hz ~ 20MHz; 6 Digits, ±0.0007%
OUTPUT IMPEDANCE: 25Ω / 100Ω SELECTABLE
BASIC ACCURACY: ±0.08%
TEST SPEED
MAX: 25ms(>10kHz), FAST: 50ms(>20Hz), MEDIUM: 100ms
SLOW: 300ms, SLOW2: 600ms
TEST SIGNAL LEVEL
AC Voltage:10mV ~ 2Vrms (FREQ. ≦ 1MHz), 10mV ~1Vrms (FREQ. > 1MHz or FREQ. ≦ 1MHz and RO=25Ω)
AC Current: 100μA ~ 20mArms (RO=100Ω), 200μA ~ 40mArms (RO=25Ω)
DCR Voltage:1Vdc (40mA max.)
MEASUREMENT PARAMETERS
Maximum four parameters can be measured and displayed at the same time
Impedance (Z), Inductance (Ls / Lp), Capacitance (Cs / Cp), AC Resistance (Rs / Rp), Quality Factor (Q),
Dissipation Factor (D), Admittance (Y), Conductance (G), Reactance (X), Phase Angle (θd / θr),
Susceptance (B), DC Resistance (Rdc)
LIST MEASUREMENT
Listed Steps: 15
Listed Parameters: Freq/Vac/Iac/DC Bias/Comp/BIN
Trigger: AUTO, REPEAT, SINGLE
SWEEP MEASUREMENT
Swept Graphical: Two of measurement parameters
Swept Parameters: Freq/Vac/Iac, Keep Trace
OTHER FUNCTIONS
Auto Level Control (ALC): Standard
DC Bias: 0 ~ ±12V
Handler: PASS, FAIL and OK, NG or BIN 1-9
OTHER FEATURES
Correction: Open/Short/HF Load/Load
V/I Monitor: Vac, Iac, Vdc, Idc
Comparator: Value, Δ , Δ %
Buzzer: OFF, Pass, Fail
Average: 1 to 64
DISPLAY: 7" LCD color display (800x480)
INTERFACE: USB/GPIB/LAN/RS-232/Handler/USB Host/TRIGGER Input
POWER SOURCE: AC 100V~240V, 50/60Hz; Consumption: 65VA (max.)
DIMENSIONS & WEIGHT 346 (W) X 145 (H) X 335 (D) mm; Approx. 3.3kg
Included Accessories
Safety Instruction x 1, CD x1(user manual),
Power cord x 1, Test lead LCR-06B x 1
