ຮັບສ່ວນຫຼຸດພິເສດຕາມປະລິມານ, ອັບເດດລາຄາຂາຍສົ່ງ ແລະ ການແຈ້ງເຕືອນສິນຄ້າໃໝ່ສົ່ງກົງເຖິງອິນບັອກຂອງທ່ານ.
ໂດຍການສະໝັກສະມາຊິກ, ທ່ານຍອມຮັບ ເງື່ອນໄຂການໃຫ້ບໍລິການ ແລະ ນະໂຍບາຍຄວາມເປັນສ່ວນຕົວ ຂອງພວກເຮົາ.
ເຂົ້າເຖິງຜູ້ຊ່ຽວຊານທີ່ໄດ້ຮັບການຢັ້ງຢືນຂອງພວກເຮົາໂດຍກົງ
Test frequency: DC, 10hz~5MHz; 6 digits, ±0.0007%
Output impedance: 25ω / 100ω selectable
Basic accuracy: ±0.08%
Test speed: max: 2.5ms(>10khz), fast: 50ms(>20hz), medium:
100ms slow: 300ms, slow2: 600ms
Test signal level
AC voltage: 10mV ~ 2Vrms (freq. ≦1MHz), 10mV ~ 1Vrms (freq. > 1MHz or freq. ≦1MHz and RO=25ω)
AC current: 100μA~ 20mArms (ro=100ω), 400μA ~ 40mArms
(RO=25ω)
DCR voltage: 1VDC (40mA max.)
Measurement parameters
Maximum four parameters can be measured and displayed at the same
time
Impedance (Z), inductance (Ls / Lp), capacitance (Cs / Cp), AC resistance (Rs / Rp), quality factor (Q), dissipation factor (D), admittance
(Y), conductance (G), reactance (X), phase angle (θd / θr), susceptance (B), DC
List measurement
Listed steps: 15
Listed parameters: freq/vac/iac/dc bias/comp/bin
Trigger: auto, repeat, single
Sweep measurement
Swept graphical: two of measurement parameters
Swept parameters: freq/Vac/Iac, keep trace
Equivalent circuit model analysis (“A” series only):
7 different equivalent circuit models. The 3-components analysis
model is composed of 4 types, and the 4-components analysis model covers 3
types.
Other functions
Auto level control (ALC): standard
DC bias: 0 ~ ±12V
Handler: PASS, FAIL and OK, NG or BIN 1-9
Other features
Correction: open/short/hf load/load
V/i monitor: vac, iac, vdc, idc
Comparator: value, δ, δ%
Buzzer: off, pass, fail
Average: 1 to 64
Display: 7" LCD color display (800 x 480)
Interface: USB / GPIB / LAN / RS-232
/ HANDLER / USB HOST /
Power source: AC 100V~240V, 50/60hz; consumption: 65VA (max.)
Dimensions & weight: 346 (w) x 145 (h) x 335 (d) mm; approx.
3.3kg
