Franklingrid CADD-5000 Digital Battery Tester (0.8 - 23.5 V; 100 - 19,990 Siemens)
Voltage Range: 0.8 - 23.5 Volts DC
Conductance Range: 100 - 19,990 Siemens (Conductance testing voltage range 1V to 23.3V. Battery should be fully charged for best results.)
Test Data Storage: 50 string locations of 240 test results; Stored internally; Unlimited transfer to USB drive
Accuracy: +/-2% across test range, voltage & conductance
Voltmeter Resolution: 5mV
User Programmable Functions:
+ Preset values for over 250 battery types
+ Low voltage alarm setting
+ Low conductance warning
+ Low conductance failure
+ Test mode (pushbutton/auto start)
Cable Options: Dual contact clamps, Dual contact probes, Custom cables by quotation
Power Requirements: 7.2V, 2300mAh, NiMH; Internal swappable battery & charger
LCD Display:
+ 2.97 in x 2.81 in (75.4 mm x 71.3mm)
+128 x 128 pixels
+ 40 degree viewing angle
+ LED backlight
Keypad: Alpha-numeric; Stainless-steel dome; Polycarbonate overlay; 1,000,000 actuations
Data Transfer: Wifi; USB 2.0 Flash Drive (Type A); USB 2.0 PC Interface (Type B); Half-duplex IrDA protocol for optional printer
Environmental Operating Range: 0 to +104°F (0 to +40°C); 95% relative humidity Non-condensing
Storage Temperature: -4 to 180°F (-20 to 82°C)
Over Voltage Protection: Auto-reset disconnect, Reverse polarity protected
Dimension: 11in x 4in x 3in (279mm x 105mm x 80mm)
Tester Weight: 2.6 lb (1 Kg)
Languages: English, Spanish, German, Polish, Portuguese, Dutch, Russian, French
ຮັບສ່ວນຫຼຸດພິເສດຕາມປະລິມານ, ອັບເດດລາຄາຂາຍສົ່ງ ແລະ ການແຈ້ງເຕືອນສິນຄ້າໃໝ່ສົ່ງກົງເຖິງອິນບັອກຂອງທ່ານ.
ໂດຍການສະໝັກສະມາຊິກ, ທ່ານຍອມຮັບ ເງື່ອນໄຂການໃຫ້ບໍລິການ ແລະ ນະໂຍບາຍຄວາມເປັນສ່ວນຕົວ ຂອງພວກເຮົາ.
ເຂົ້າເຖິງຜູ້ຊ່ຽວຊານທີ່ໄດ້ຮັບການຢັ້ງຢືນຂອງພວກເຮົາໂດຍກົງ