ຮັບສ່ວນຫຼຸດພິເສດຕາມປະລິມານ, ອັບເດດລາຄາຂາຍສົ່ງ ແລະ ການແຈ້ງເຕືອນສິນຄ້າໃໝ່ສົ່ງກົງເຖິງອິນບັອກຂອງທ່ານ.
ໂດຍການສະໝັກສະມາຊິກ, ທ່ານຍອມຮັບ ເງື່ອນໄຂການໃຫ້ບໍລິການ ແລະ ນະໂຍບາຍຄວາມເປັນສ່ວນຕົວ ຂອງພວກເຮົາ.
ເຂົ້າເຖິງຜູ້ຊ່ຽວຊານທີ່ໄດ້ຮັບການຢັ້ງຢືນຂອງພວກເຮົາໂດຍກົງ
Application: Moisture measurement of thin, flat, curved, solid or semi-rigid material.
Measuring range: 0-35%
Handheld, using rechargeable batteries
Measured directly onto the surface
Method of measurement: radio frequency
Display: Analog
Power supply: 220VAC
The Model T8 uses the Radio Frequency Capacitance Method to measure the moisture content of products. It operates from a single rechargeable NI-Cad battery. It gives the operator average moisture content down to a penetration of 1/8 to 1/4 of an inch. The electrode has three concentric rings that cover an area 3 inches in diameter. Complete with Rechargeable Battery, Carrying Case and Operating Instructions Book.
The Model V veneer moisture meter is calibrated for 48 hard and soft woods in the 0 to 25% moisture range and has dials for specific woods. The Model V is ruggedly constructed, lightweight, easy to use, has solid state circuitry and is accurate to 1/8” penetration. The molded plastic handle with spring loaded switch bar permits testing with either hand. The electrode on it is surrounded by a steel ring to provide protection against static.
It employs the radio frequency power loss absorption principle which is a patented feature of Finna Group products. The instrument projects an RF field into the test area and then measures the signal loss relative to the conductivity of a dry sample. The numerical scale reading is converted to moisture content percent by means of an established calibration chart or curve for the material being tested.
| Process | Handheld |
|---|---|
| Pin Feature | Pinless |
| Contact Feature | Contact |
| Measurement Method | Radio Frequency |
| Reading Feature | Analog |
| Voltage | 115 VAC, 220 VAC |
CATALOG |
